Nexcom VTC 6222-IMIoT Intel Atom E3950, Intel Movidius AI Edge Vehicle Solution

Nexcom VTC 6222-IMIoT Intel Atom E3950, Intel Movidius AI Edge Vehicle Solution

VTC 6222-IMIoT

  • Built-in Intel Movidius Myriad-X mPCIe deep learning accelerator module
  • Intel Atom processor quad core E3950, up to 2.0GHz
  • 4 x PoE (802.3af/at, max. 60W)
  • Built-in u-blox-M8N GPS
  • Built-in CAN Bus 2.0B
  • Three video outputs, one VGA and two HDMI
  • E Mark conformity
  • 3 x mini-PCIe socket expansion
  • Dual external storage (compatible with 15mm disk)
  • 1 x USB DOM to run OS
  • 1 x SD card for exporting and backing up data

Customisation Service

We can configure this device for you to your exact specification. So we can provide you with the best possible service, please let us know a little about your project if you need this service.

-
+

Details

The Nexcom VTC 6222-IMIoT, based on Intel Atom quad core processor E3950 (up to 2.0GHz), is specifically comply with stringent E mark standard in rugged, fanless and compact mechanism. VTC 6222-IMIoT provides complete communication capability between vehicle and computer with build-in CAN BUS 2.0B interface. Equipped with intelligent power management, VTC 6222-IMIoT can be waked on by ignition, RTC timer or SMS message remotely. VTC 6222-IMIoT supports 4 x 802.3at/3af (max. 60W) PoE ports to connect with IP cameras. The design of 2.5″ removable SSD and SD memory card helps to access storage easily. VTC 6222-IMIoT keeps the flexibility to meet the demand for video surveillance in vehicle application.

Downloads

System Integration

Please ask about how we can configure your solution

Global Operations

We ship and support products via offices globally

Full Warranty

Industry leading warranties on all solutions as standard

Technical Support

Experienced engineers are on hand to support your project

Can't Find What You Want?

Specification

CPU Intel Atom® processor quad core E3950, up to 2.0GHz, 12W, 4 core
Memory 1 x 204-pin DDR3L SO-DIMM socket support 1866MHz up to 8GB. Default 4GB
Myriad-X mPCIe Deep Learning Accelerator Module 1 or 2 Myriad™ X MA2485 VPU Per VPU with– Up to 1 TOPS– 16 programmable 128-bit VLIW vector processors– CPUs 2 x LEON 4 cores (RISC; SPARC V8)– On-chip accelerators 20+ image/vision processing accelerator – Neural compute engine (DNN accelerator)– Neural network capability neural compute engine Operating voltage: 3.3V +/- 10 % Dimensions: 51mm x 30mm x 2.5 mm
Video Output Chipset Intel® HD graphics 505 2 x HDMI 1.4b up to 4096 x 2160 @30Hz 1 x VGA up to 1920 x 1200 @60Hz
Storage 2 x 2.5″ SSD/HDD SATA 3.0 (compatible with 15mm drive) 1 x SD memory card 3.0 (externally accessible) 1 x USB EDC for USB DOM
Expansion 1 x Full size mini-PCIe socket (USB 2.0), BOM optional M.2 Key B (USB2.0 + USB 3.0) with 2 x external SIM 1 x Full size mini-PCIe socket (USB 2.0 + PCIe 2.0) 1 x Half size mini-PCIe socket (USB 2.0 + PCIe 2.0)
GNSS and On Board Sensor 1 x Default U-blox NEO-M8N GNSS for GPS/Glonass/QZSS/Galileo/Beidou G Sensor (3-axis, 10-bit resolution) TPM 2.0 (optional)
LAN and Power over Ethernet 4-Port LAN, 10/100/1000 Mbps I210-IT GbE, PoE 802.3af/at, max. 60W 1-Port LAN, 10/100/1000 Mbps I210-IT GbE
I/O Interface-Front 12 x LED indicators (including 3 x programmable LED) 2 x Externally accessible SIM card socket with cover 2 x 2.5″ removable SSD tray 1 x Externally accessible SD card socket with cover 1 x Reset button 1 x Power button 1 x USB 3.0 type A (5V/0.9A) 2 x HDMI 1.4b 1 x Mic-in, 1 x Line-out
I/O Interface-Rear 1 x 3-pin terminal block for 9V~48V DC 1 x RJ45 10/100/1000 Mbps 4 x PoE 802.3af/at (max. 60W) 1 x VGA 1 x DB9 full RS-232 4 x SMA antenna 2 x USB 2.0 type A (5V/0.5A) 1 x Line-out 1 x DB15 (DIO)– 4 x DI with isolation– 4 x DO with isolation– Vin, GND for GPIO 1 x DB15 (MULTI PORT)– 1 x RS422/RS485– 1 x RS232 (TX/RX)– 1 x CAN 2.0B– 1 x 12VDC, 2A output (Vout, GND)
Power Management Power input 9~48 VDC Selectable boot-up & shut-down voltage for low power protection by software Setting 8-level power on/off delay time by software Support S3/S4 suspend mode 10~255 seconds WDT support, setup by software SDK (Windows/Linux) including utility and sample code
Operating System Windows 10/Linux
Dimensions 260mm (W) x 196mm (D) x 66.5mm (H)
Weight 3.2kg
Environment Operating temperatures: -20°C~60°C (w/ Google Edge TPU & industrial SSD) with air flow Storage temperatures: -40°C to 80°C Relative humidity: 10% to 90% (non-condensing) Vibration (SSD)– Operating: MIL-STD-810G, Method 514.6, Category 4, common carrier US highway truck vibration exposure– Storage: MIL-STD-810G, Method 514.6, Category 24, minimum integrity test Shock (SSD)– Operating: MIL-STD-810G, Method 516.6, Procedure I, functional shock=40g– Non-operating: MIL-STD-810G, Method 516.6, Procedure V, crash hazard shock test=75g
Standards/Certifications CE FCC Class A E13 mark