Access IO mPCIe-AIO16-16F 16-Bit 1 MHz x 2 Mini-PCIe Card

ACCES I/O Official Distributor
ACCES I/O Official Distributor
Model No:
mPCIe-AIO16-16F
Highlights:
  • PCI Express Mini Card (mPCIe) Type F1, Multi-Function DAQ with latching I/O connectors
  • 2× 16-bit, bipolar, differential, A/D converters sampling at up to 1MHz, simultaneously (2MSPS aggregate)
  • Software selectable as 16+0, 8+4, or 0+8 (single-ended + differential inputs)
  • Seven channel-by-channel Programmable differential input ranges from ±0.3125V up to ±12V
  • A/D starts via software, external input, or periodic timer
  • A/D “scan start” mode optimizes inter-channel timing
  • High Impedance, 16-channel input: 500 MΩ
  • DMA+FIFO (4 kSamples) for efficient, robust data streaming
  • Four 16-Bit Analog Outputs
  • 5 per-channel programmable ranges: 0-5V, 0-10V, ±2.5V, ±5V, ±10V
  • Outputs drive ±10mA
  • “FDS” model allows hardware-timed DMA+FIFO (8 kSamples) waveform streaming on up to four DACs
  • Two digital I/O with flexible secondary functions
  • Onboard watchdog with status output
  • RoHS Standard
QTY:
Downloads:
Overview

The mPCIe-AIO16-16F family is an ideal solution for adding high-speed analog I/O capabilities to any computer with an mPCIe slot.

The mPCIe-AIO16-16F is a 16-bit resolution A/D & D/A board with two simultaneous 1MHz A/D converters, providing 8 single-ended (pseudo-differential) or 4 differential analog inputs, per ADC. Each channel can be independently software configured to accept any input ranges.

Two digital I/O bits, each individually software programmable for use as an input or an output. These bits feature software-selectable alternate functions including use as ADC trigger, DAC trigger, and more.

Four analogue outputs with uni- and bipolar 5 and 10 volt ranges and a ±2.5V range round out the feature set.

The “FDS” model includes a new DMA-driven hardware-timed buffered DAC output feature, “DAC Waveform Streaming”. This feature allows one or more of the DACs to output voltage levels at a software-configurable rate as high as 1 million samples/second. Although the maximum rate is divided by the number of DACs being used, all DACs’ outputs update simultaneously on the hardware clock’s tick — all four DACs can output simultaneous data at 250 kilosamples/second, or one at 1 MHz! All the data is transferred by DMA to minimize CPU utilization, with IRQs so applications can send additional buffers of data as needed.

This tiny analogue I/O board provides the user with everything needed to start acquiring and controlling signals in a variety of applications. The mPCIe-AIO16-16F data acquisition board can be used in many current real-world applications such as embedded equipment monitoring, precision PC-based and portable environmental measurements, and mobile data acquisition. The board is designed to be used in rugged industrial environments and is double sided, mPCIe F1 sized.

Applications: Optical Networking, Instrumentation, Multichannel Data Acquisition and system monitoring, Automatic Test Equipment, Process Control and Industrial Automation, Power line monitoring.

Accessories and Connections

Available accessories include a variety of screw terminal boards for quick and easy connectivity as well as 2mm and 2.5mm mounting hardware. Alternately, custom hardware cables and/or interfaces can be produced to fit your specific application requirement.

SOFTWARE

The card is supported for use in most operating systems and includes a free Linux and Windows compatible software package. This package contains sample programs and source code in C#, Delphi, and Visual C++ for Windows. Also provided is a graphical setup program in Windows. Linux support includes installation files and basic samples for programming from user level via an open source kernel driver. Third party support includes a Windows standard DLL interface usable from the most popular application programs. Embedded OS support includes the family of Windows Operating Systems including IoT. ACCES is also now offering a VxWorks driver/library for the ultimate real-time process monitoring and control solution.

 

Main Features
PC Interface  
PCI Express Mini Card  Type F1 “Full Length” V1.2
Analogue Inputs  
ADC Type Successive Approximation
Resolution 16-bit
Sampling Rate 2Msamples/second aggregate (1MHz per ADC, simultaneous)
Number of Channels 16 Single-Ended or 8 Differential (software selectable)
Unipolar Ranges 0-1V, 0-2V, 0-5V, 0-10V
Bipolar Ranges ±1V, ±2V, ±5V, ±10V
4-20mA or 10-50mA Factory Option
Accuracy  0.094% Full-Scale (FS) Uncalibrated, 0.0015% FS Calibrated (for best accuracy, system calibration is recommended)
Integral Nonlinearity Error 0.0011% FS
No Missing Codes 16 bits
Input Impedance 1MΩ
A/D Start Sources Software, Timer, External; rising or falling edge, software selectable
A/D Start Enable Externally supplied (pulled-up active-high input)
A/D Start Types Single Channel, Scan of Channels (software selectable)
Channel Oversample 1 to 256 consecutive samples /channel dwell
Overvoltage Protection -40 to +40V
Crosstalk -53dB @ 1MHz, -84db @ 500kHz
Analogue Outputs  
Number 4
Type Single-Ended
Resolution 16-bit
Unipolar Ranges 0-5V, 0-10V (factory option)
Bipolar Ranges ±2.5V, ±5V, ±10V (default)
Conversion Rate ≥125kHz per channel
Setting Time 4µs typical, 7µs max; ¼ to ¾ scale, to ±2 least-significant bits
Output Current ±10mA per channel
Digital Inputs/Outputs  
Lines 2, individually software configurable as input or output
Input Voltage Logic Low: 0V to 0.8V
Logic High: 2V to 5V
Input Current ±20µA (max)
Output Voltage Logic Low: 0V to 0.55V
Logic High: 2V to 5V
Output Current Logic Low: 64mA sink (max)
Logic High: 32mA source (max)
Environmental  
Temperature Operating: 0°C to 70°C (order -T option for industrial temperature -40°C to +85°C)
Storage: -40°C to 105°C
Humidity  5% to 95%, non-condensing
Power Required +3.3VDC @ 300ma (typical)
Physical  
Weight 6.2 Grams
Size Length: 50.95mm (2.006")
  Width: 30.00mm (1.181")
I/O Connector On-card: Molex 501190-4017 40-pin latching
  Mating: Molex 501189-4010
Regulatory Compliance  
  This product is designed to be in full compliance with CE requirements.
Ordering Info
Model Description
mPCIe-AIO16-16FDS

mPCIe, 16 SE, or 8 Diff, or 8 SE and 4 Diff, 16-Bit, 1M x 2 Samples/s, AI; 2 DIO, 4 AO; Waveform Output

mPCIe-AIO16-16F

mPCIe, 16 SE, or 8 Diff, or 8 SE and 4 Diff, 16-Bit, 1M x 2 Samples/s, AI; 2 DIO, 4 AO

mPCIe-AI16-16F

mPCIe, 16 SE, or 8 Diff, or 8 SE and 4 Diff, 16-Bit, 1M x 2 Samples/s, AI; 2 DIO

mPCIe-AIO16-16A

mPCIe, 16 SE, or 8 Diff, or 8 SE and 4 Diff, 16-Bit, 500K x 2 Samples/s, AI; 2 DIO, 4 AO

mPCIe-AI16-16A

mPCIe, 16 SE, or 8 Diff, or 8 SE and 4 Diff, 16-Bit, 500K x 2 Samples/s, AI; 2 DIO

mPCIe-AIO12-16A

mPCIe, 16 SE, or 8 Diff, or 8 SE and 4 Diff, 12-Bit, 500K x 2 Samples/s, AI; 2 DIO, 4 AO

mPCIe-AIO16-16E

mPCIe, 16 SE, or 8 Diff, or 8 SE and 4 Diff, 16-Bit, 250K x 2 Samples/s, AI; 2 DIO, 4 AO

mPCIe-AI12-16A

mPCIe, 16 SE, or 8 Diff, or 8 SE and 4 Diff, 12-Bit, 500K x 2 Samples/s, AI; 2 DIO

mPCIe-AIO12-16

mPCIe, 16 SE, or 8 Diff, or 8 SE and 4 Diff, 12-Bit, 250K x 2 Samples/s, AI; 2 DIO, 4 AO

mPCIe-AI16-16E

mPCIe, 16 SE, or 8 Diff, or 8 SE and 4 Diff, 16-Bit, 250K x 2 Samples/s, AI; 2 DIO

mPCIe-AIO12-16E

mPCIe, 16 SE, or 8 Diff, or 8 SE and 4 Diff, 12-Bit, 100K x 2 Samples/s, AI; 2 DIO, 4 AO

mPCIe-AI12-16

mPCIe, 16 SE, or 8 Diff, or 8 SE and 4 Diff, 12-Bit, 250K x 2 Samples/s, AI; 2 DIO

mPCIe-AI12-16E

mPCIe, 16 SE, or 8 Diff, or 8 SE and 4 Diff, 12-Bit, 100K x 2 Samples/s, AI; 2 DIO

Model Options
 
-T Extended Temperature Operation (-40° to +85°C)
-I 4-20mA inputs (Single-ended)
-ID 4-20mA inputs (Differential)
-PD Pull downs on digital bits
-Sxx -Special configurations
(10-50mA inputs, input voltage dividers, conformal coating, etc.)
Accessories
Cable from mPCIe card to DB37M connector
CAB-mPCIe-AIO Cable, Twisted pair, Molex 40 pin to Male DB37, 9″ $29
LF-BRK-P9259-37 Mounting bracket for DB37M on CAB-mPCIe-AIO
Direct Connect Terminal board to DB37
ADAP37F-MINI Direct plug-on terminal board mates with DB37M on CAB-mPCIe-AIO $40
Cable Connectivity to DB37
CAB37-18 Cable, Ribbon, DB37F-F, 18″ $25. (Other lengths available)
STB-37 Screw terminal board, DB37M, DIN-rail mountable $39
Mounting Hardware
DIN-SNAP-6 6” SNAPTRACK, DIN-Rail mounting clips to mount an STB-37 $15
mPCIe-HDW-KIT2 2mm mounting hardware kit $1
mPCIe-HDW-KIT2.5 2.5mm mounting hardware kit $1
Compute. Control. Communicate.
Call our experts today for friendly advice on +44 (0) 1785 879 050

close

Assured Systems expertise is here for project support.

Get in touch with your requirements to see what we recommend!

phone +44 (0) 1785 879 050

close

Assured Systems expertise is here for project support.

Get in touch with your requirements to see what we recommend!

close

Assured Systems expertise is here for project support.

Get in touch with your requirements to see what we recommend!

Chat With Us!