1-ch Analog Input Module

Model No:
ADAM-4012
Highlights:
  • Input type: mV, V or mA
QTY:
Downloads:
Overview

Analog input modules use a microprocessor-controlled integrating A/D converter to convert sensor voltage, or current signals into digital data. The digital data is then translated into either engineering units, twos complement hexadecimal format or percentage of full-scale range (FSR) according to the module’s configuration.

When prompted by the host computer, the data is sent through a standard RS-485 interface. The Analog Input Modules offer signal conditioning, A/D conversion, ranging, and RS-485 digital communication functions. They protect your equipment from ground loops and power surges by providing opto-isolation of the A/D input and transformer based isolation up to 3000 V DC.

Main Features
  • Power Consumption: 1.2 W @ 24 VDC
  • Supported Protocols: ASCII command
    Analog Input
  • Channels: 1
  • Input Impedance: Voltage: 20 MΩ
    Current: 125 Ω (Added
    by user)
  • Input Type: mV, V or mA
  • Input Range: ±150 mV, ±500 mV, ±1 V,
    ±5 V, ±10 V and ±20 mA
  • Accuracy Voltage mode: ±0.1% or better
    Current mode: ±0.2% or better
  • Span Drift: ±25 ppm/°C
  • Zero Drift: ±6 μV/°C
    Digital Input
  • Channels 1
    Logic level 0: 1 V max.
    Logic level 1: 3.5 ~ 30 V 
    pull up current: 0.5 mA, 10 kΩ resistor to 5 V
  • Event Counter Max. input freq.: 50 Hz
    Min. input pulse width: 1 msec.
    Digital Output
  • Channels 2, open collector to 30 V,
    30 mA max. load
  • Power Dissipation: 300 mW
Ordering Info
  • ADAM-4012 - 1-ch Analog Input Module

Want A Quote? Get In Touch

Call our experts today for friendly advice on
+1 864 421 6991