VMC 1100

Nexcom VMC 1100 7″ All-In-One Touch Vehicle Computer w/ Multifunctional Tracker

VMC 1100

  • 7″ WVGA TFT LCD Monitor with resistive touch screen
  • Built-in Intel Atom Dual Core E3825 1.33GHz
  • Compact and fanless design
  • On screen programmable F1 ~ F5 function keys
  • Support GPS/WWAN tracker function for car-safety
  • RFID for ID identification
  • Built-in GPS (Option: Dead Reckoning Support)
  • GPS/WLAN/WWAN for wireless communication
  • Dual CAN bus 2.0B and optional OBDII (SAE J1939) for car diagnostic
  • Wide Range DC input from 9 ~ 36V
  • Military standard for vibration and shock
  • SAE J1113, ISO7637-2 and SAE J1455 conformity for power design
  • CE/FCC/EMark

For further information, please click “Add to Enquiry” or call us on +44 (0) 1785 879050 (UK).

Customisation Service

We can configure this device for you to your exact specification. So we can provide you with the best possible service, please let us know a little about your project if you need this service.

-
+

Details

The Nexcom VMC 1100, a new generation 7-inch vehicle mount computer with dual core Intel Atom® processor, is designed for transportation and harbor applications requiring real-time vehicle tracking and job-dispatching. For real-time communication between driver and central control room, VMC 1100 provides the capability of wireless connection from GPS, WLAN to WWAN. To get more data from accessories, it offers RS-232, RS-485, USB 2.0, GPIO, and LAN connection. Dual CANBus 2.0B ( OBDII and J1939 protocol ), analog input and PWM are able to help to receive car status more quickly and correctly. Due to the unique features above, VMC 1100 is perfect to used in harbor application from container truck, forklift, container stacker….

Downloads

Assured Systems Datasheet (PDF)

A PDF edition of this page with supporting manufacturer datasheets

System Integration

Please ask about how we can configure your solution

Global Operations

We deliver and support products via offices globally

Full Warranty

Industry leading warranties on all solutions as standard

Technical Support

Experienced engineers are on hand to support your project

Can't Find What You Want?

Specification

General Cooling System: Fanless Enclosure: Plastic PC + ABS with aluminum die casting heatsink Mounting: Support VESA 75, stand mounting Four SMA Type antenna connectors of BT/Wi-Fi/WWAN/GPS Power Input: 9 ~ 36VDC input with Ignition Power Consumption: 26W Ingress Protection: Front panel IP54 Dimension: 213mm (W) x 145mm (H) x 50mm (D)(8.3″ x 5.7″ x 1.9″) Weight:N.W: 1.3KgG.W: 1.6Kg
LCD Panel 7-inch TFT LCD Panel with LED Backlight 800 x 480 pixels (WVGA) Brightness: 400 cd/m² (typical) Contrast ratio: 600:1 (typical)
Touch Screen Sensor 4-wire resistant touch Anti-glare coating surface Transmission rate: 78 ± 3%
CPU & Chipset Intel® Atom™ Dual Core E3825 1.33GHz
Memory One 204-pin DDR3L 1600MHz SO-DIMM slot (up to 4GB)– Default 2GB
Expandable Storage 1 x SATAIII SATA DOM Slot (available option 16GB / 32GB / 64GB)
Expansion 1 x Half mini-PCIe socket (PCIe + USB) for WLAN option 1 x mini-PCIe socket ((USB + UART) for WWAN option) 1 x External module for OBD/RFID module option(UART + USB)
I/O Interface-Front F1 ~ F5 functions key Light Sensor Internal Mic-in 2 x Built-in 2W speakers 3 x LED indicators (Power mode, Storage and WWAN status)
I/O Interface-Lateral Right side– 1 x Micro SD card socket– 1 x SIM card socket– 1 x USB 3.0 host type A connector– 1 x Mic-in, Line-out Left side– 1 x Power button– 1 x System reset button– Volume up/down or Brightness up/dow
I/O Interface-Rear 1 x 5-pin Circular connector for Power/Ignition input 1 x RJ45 for LAN 1 x RJ45 for Full RS-232 with 0V/5V/12V power supply (0.5A) 1 x DB9 (Male) for– RX/TX or RS-485– 2 x CAN Bus 2.0 1 x DB15 (Female) for– GPS dead reckoning interface (optional)– 2 x PWM, 2 x Analog Input, 2 x GPO, 2 x GPI Analog Input requirement for Voltages are measured Channel: 2 Voltage range: 0 ~ 38V Resolution: 8 bit Input requirement for frequency, speed Square wave Channel: 2 Frequency signal offset voltage range: 0~15VDC, 1Hz~5KHz Protection: +/- 500V spike Frequency signal duty cycle range: 10% ~ 90%
Communication Module 1 x u-blox NEO-M8N module (support GPS/Gloness/QZSS/Galileo/Beidou) 1 x WLAN or Bluetooth module for optional 1 x WWAN module for optional
Power Management Selectable boot-up & shut-down voltage for low power protection HW design ready for 8-level delay time on/off at user’s self configuration Power on/off ignition, software detectable Support S3 and S4 suspend mode; wake on RTC and SMS
Operating System Windows 10 Windows 8 Professional, WES8 Windows 7, WES7 Linux Fedora (kernel V3.2.0)
Environment Operating temperatures: Ambient with air -20°C to 60°C Storage temperatures: -30°C to 80°C Relative humidity: 10% to 95% (non-condensing) Vibration (random): 3g @5 ~ 500Hz VibrationOperating: MIL-STD-810G, 514.6 Procedure 1, Category 4Storage: MIL-STD-810G, 514.6 Procedure 1, Category 24 ShockOperating: MIL-STD-810G, Method 516.6, Procedure I, trucks and semi-trailers=20gCrash hazard: MIL-STD-810G, Method 516.6, Procedure V, ground equipment=75g
Power Design & Protection Load dump and inductive load protection Cold cranking protection Transient voltage protection Electrostatic discharge protection
Standards/Certifications EMC– CE, FCC class B, E-Mark Power– SAE J1113– SAE J1455– ISO 7637-2 Safety– EN 60950-1 LVD
Processor Type Intel Atom, up to 2 Cores
Memory Capacity Up to 4GB
Cooling Type Fanless
Serial Ports (COM) 1x RS-232, 1x RS-485
USB Ports 1x USB 3.0
Ethernet Ports (LAN) 1x 1G
Wireless Cellular, Wi-Fi
CAN Bus Yes
Audio Yes
Storage Type 1x SATA, 1x MicroSD
Expansion Type 2x Mini PCI Express
Input Voltage 9-36 VDC
Mounting Options VESA-mount
Operating Temperature Extra-Wide OT: -20°C to 60°C, Extra-Wide
Market Certifications CE/FCC, E-Mark, MIL-STD
OS Support Linux, Windows 10, Windows 7

Delivery Information

Orders placed by EMEA customers will be delivered by DHL.

Payment Methods & Options

Accepted payment options for EMEA customers include VISA, Mastercard or bank transfer in GBP.

Warranty & Service Information for Nexcom Products (EMEA)

All Nexcom products purchased from Assured Systems in the EMEA come with a 2 year warranty as standard, with additional extension options available upon request. As an official Nexcom partner, we are proud to provide customers with peace of mind and the highest quality products, including any systems which have been configured to meet individual specifications.

Related Products

You may also like...

DFI

VC70B-KU

DFI-VC70B-KU Compact and Fanless In-Vehicle Computer

Nuvo-6108GC

Neousys Nuvo-6108GC Industrial GPU Computer

UST500-517-FL

Axiomtek UST500-517-FL 7th Gen Fanless Railway PC with 16 PoE EN50155 Certified