RIDACS

Remote Intelligent Data Acquisition and Control Systems

RIDACS

Distributed Input/Output is commonly used to reduce installation cost, " home-run" wiring, and potential noise interference. REMOTE ACCES pods installed in RIDACS systems let you install interfaces and control outputs close to the sensors and controllers and provide communication with a host computer via a two-wire, high-noise-immunity serial communications network. The two-wire connection keeps the number of cables and connectors to a minimum, simplifies installation, and reduces overall cost. Further, optical isolation at each pod prevents ground loop problems between the computer and the I/O circuits. RIDACS systems consist of pods such as RAG128, RDG-24, etc. and combinations of signal conditioning multiplexers such as AIM-16P and LVDT-8. Typically, one or two of the latter will be used with an RAG128. These are installed in a NEMA4 rated, 14-gauge steel case without any holes or knock-outs except for glands provided for I/O wiring.

  • Brand: Acces IO
  • Remote intelligent analog and digital I/O unit with opto-isolated RS-485 multi-drop interface to host computer
  • Industry-standard 8051 compatible microcontroller
  • NEMA4 enclosure for harsh environments
  • Wide variety of configurations for analog, digital, and mixed configurations
-
+

Details

Distributed Input/Output is commonly used to reduce installation cost, " home-run" wiring, and potential noise interference. REMOTE ACCES pods installed in RIDACS systems let you install interfaces and control outputs close to the sensors and controllers and provide communication with a host computer via a two-wire, high-noise-immunity serial communications network. The two-wire connection keeps the number of cables and connectors to a minimum, simplifies installation, and reduces overall cost. Further, optical isolation at each pod prevents ground loop problems between the computer and the I/O circuits. RIDACS systems consist of pods such as RAG128, RDG-24, etc. and combinations of signal conditioning multiplexers such as AIM-16P and LVDT-8. Typically, one or two of the latter will be used with an RAG128. These are installed in a NEMA4 rated, 14-gauge steel case without any holes or knock-outs except for glands provided for I/O wiring.

Ordering Info

  • RIDACS

System Integration

Please ask about how we can configure your solution

Global Operations

We deliver and support products via offices globally

Full Warranty

Industry leading warranties on all solutions as standard

Technical Support

Experienced engineers are on hand to support your project

Can't Find What You Want?

Specification

  • Remote intelligent analog and digital I/O unit with opto-isolated RS-485 multi-drop interface to host computer
  • Eight-channel programmable gain, 12-bit resolution A/D converter
  • Wide variety of configurations for analog, digital, and mixed configurations
  • NEMA4 enclosure for harsh environments
  • Data stored in RAM can be accessed at the convenience of the computer
  • All communication is ASCII-based command/response protocol at rates up to 28.8Kbaud
  • Industry-standard 8051 compatible microcontroller

Delivery Information

Orders dispatched from Assured Systems USA will be delivered using FedEx.

Payment Methods & Options

Accepted payment methods for US customers include bank transfer, VISA or Mastercard in USD.

ACCES I/O: Warranty and Service Information

All ACCES I/O products distributed in the EMEA come with a 2 year warranty as standard, with additional extension options available upon request. As an official ACCES I/O partner, we are proud to provide customers with peace of mind and the highest quality products, including any systems which have been configured to meet individual specifications.

Related Products

You may also like...

104-AO12-4

PC/104 Analog Output Board

104-AI12-8

PC/104 Analog Input Board

Fast USB-DIO Series

USB Digital Waveform Generator Modules w/16 High-Speed Digital I/O

104-IDIO-16 Family

32 Channel Optically Isolated Digital Card