PCIe-IIRO-8

PCI Express with 8 Isolated Inputs, 8 Relay Outputs, and COS Detection

PCIe-IIRO-8

The PCIe-IIRO-8 is a x1 lane PCIe isolated digital input and relay output board with Change of State (COS) detection capabilities. The isolated inputs can be driven by either AC or DC and are not polarity sensitive. Input signals are rectified by a diode bridge and applied to the inputs of opto-isolators. A 470 ohm resistor in series provides current limiting. Standard 12/24 AC control transmitter outputs can be accepted as well as DC voltages. The input voltage range is 5V to 24V (rms). To extend the input voltage range, you may connect external resistors in series. The electro-mechanical relay outputs of the PCIe-IIRO-8 are comprised of five form C SPDT outputs and three Form A SPST (normally-open) type. The relays are all de-energized at power-on. Data to the relays is latched. I/O wiring connections for this board are via a male 37-pin D-sub connector. A ribbon cable can be used to connect this card to termination panels.

  • Brand: Acces IO
  • Eight optically isolated, non-polarized digital inputs
  • Switchable filters on inputs for electrically noisy environments
  • Eight electro-mechanical relay outputs
-
+

Details

The PCIe-IIRO-8 is a x1 lane PCIe isolated digital input and relay output board with Change of State (COS) detection capabilities. The isolated inputs can be driven by either AC or DC and are not polarity sensitive. Input signals are rectified by a diode bridge and applied to the inputs of opto-isolators. A 470 ohm resistor in series provides current limiting. Standard 12/24 AC control transmitter outputs can be accepted as well as DC voltages. The input voltage range is 5V to 24V (rms). To extend the input voltage range, you may connect external resistors in series. The electro-mechanical relay outputs of the PCIe-IIRO-8 are comprised of five form C SPDT outputs and three Form A SPST (normally-open) type. The relays are all de-energized at power-on. Data to the relays is latched. I/O wiring connections for this board are via a male 37-pin D-sub connector. A ribbon cable can be used to connect this card to termination panels.

Ordering Info

  • PCIe-IIRO-8

Downloads

Assured Systems Datasheet (PDF)

A PDF edition of this page with supporting manufacturer datasheets

System Integration

Please ask about how we can configure your solution

Global Operations

We deliver and support products via offices globally

Full Warranty

Industry leading warranties on all solutions as standard

Technical Support

Experienced engineers are on hand to support your project

Can't Find What You Want?

Specification

  • Eight optically isolated, non-polarized digital inputs
  • Switchable filters on inputs for electrically noisy environments
  • Eight electro-mechanical relay outputs
  • Optically isolated channel to channel and channel to ground
  • Can detect input state change and assert interrupt
  • Automatically detected under Windows

Delivery Information

Orders dispatched from Assured Systems USA will be delivered using FedEx.

Payment Methods & Options

Accepted payment methods for US customers include bank transfer, VISA or Mastercard in USD.

ACCES I/O: Warranty and Service Information

All ACCES I/O products distributed in the EMEA come with a 2 year warranty as standard, with additional extension options available upon request. As an official ACCES I/O partner, we are proud to provide customers with peace of mind and the highest quality products, including any systems which have been configured to meet individual specifications.

Related Products

You may also like...

P104-DIO-96 Series

PC/104-Plus 48 or 96-Channel Digital I/O with Change-of-State

104-AIO16

16-Bit, 16-Channel, PC/104 Multifunction Analog I/O Boards

104-IIRO-16

Isolated Digital Input and Relay Output Card

104-DIO-24S

Change-Of-State Detecting Digital I/O Cards