EA713-AAMN-1PC0

AVerMedia EA713-AAMN-1PC0 NVIDIA Jetson AGX Xavier 16GB Box PC w/ Cooling System

EA713-AAMN-1PC0

NVIDIA Jetson AGX Xavier Expandable Box PC with 2 M.2 Slots, 4 mPCIe Slots, Fast Access NVME Storage, CAN BUS, Mic In, Audio Out, 5 GPIO, 4K Output and Wide Temperature Support

  • Fully support NVIDIA Jetson AGX Xavier 16GB module
  • 4x Mini-PCIe or 2x M.2 Key M 2280 alternatively
  • 1x M.2 Key E 2230 for Wi-Fi module
  • 1x M.2 Key M 2280 for NVMe
  • 2x GbE, 2x USB 3.0, 1x 4Kp60 HDMI output
  • 1x USB 2.0 Micro-B for BSP installation only , 1x micro SD card slot
  • 1x CAN bus, 1x RS-485, 1x Mic-in, 1x Speaker-out
  • 40 pins: 1x UART, 2x I2C, 5x GPIO, and 1 x CAN (W/O transceiver)
  • Operating temperature: -10°C ~ 60°C (MODE_30W_ALL, No-Air-Flow)
  • Carrier board dimension: W:196mm x L:242mm x H:60mm (7.72” x 9.53” x 2.36”, with mounting ears W: 226mm, 8.9”)

Customisation Service

We can configure this device for you to your exact specification. So we can provide you with the best possible service, please let us know a little about your project if you need this service.

-
+

Details

AVerMedia EA713-AAMN-1PC0 Box PC equips NVIDIA Jetson AGX Xavier 16GB which aims it at AI centric use cases for edge computing such as robotics and industrial automation within dimension W:196mm x L: 242mm x H:60mm (7.72" x 9.53" x 2.36", with mounting ears W: 226mm, 8.9”). EA713-AAMN-1PC0 Box PC provides 2x M.2 Key M 2280 and 4x mPCIe slots alternatively for Xavier to receive various video inputs by using AVerMedia’s capture cards. These 2x M.2 Key M 2280 and 4x mPCIe slots share PCIe Gen2 x4 lanes, so EA713-AAMN-1PC0 Box PC can provide three different combinations for developers to install video capture cards alternatively, such as 2x M.2 Key M 2280 slots, 4x mPCIe slots, and 2x mPCIe slots with 1x M.2 Key M 2280 slot. By using AVerMedia’s extended video capture cards, Xavier is able to receive HDMI, VGA, SDI, composite video inputs, and even dual 4Kp30 HDMI video inputs for different application scenarios. EA713-AAMN-1PC0 Box PC provides 2x GbE, and 2x USB 3.0 for Xavier to connect various IP cameras and USB 3.0 cameras. General purpose I/O are ready for developers to use such as 1x 4Kp60 HDMI output, 1x USB 2.0 Micro-B for BSP installation only, 1x micro SD card slot, 1x Mic-in, and 1x Speaker-out, 1x CAN bus, 1x RS-485. It also provides 40 pins of GPIO expansion: 1x UART, 2x I2C, 1x CAN, and 5x GPIO for Xavier to communicate with the external devices. This highly integrated edge computer is a well prepared application ready system for developers to overcome the challenges timely and easily.

Downloads

Assured Systems Datasheet (PDF)

A PDF edition of this page with supporting manufacturer datasheets

System Integration

Please ask about how we can configure your solution

Global Operations

We deliver and support products via offices globally

Full Warranty

Industry leading warranties on all solutions as standard

Technical Support

Experienced engineers are on hand to support your project

Can't Find What You Want?

Specification

Type Box PC with AVerCooler WavieFin passive cooling system
NVIDIA GPU SoC Module Compatibility NVIDIA Jetson AGX Xavier 16GB module
Networking 2x GbE (RJ-45)
Display Output 1x HDMI type A, maximum resolution: 3840×2160 at 60Hz
Temperature Operating Temperature -10°C~60°C (MODE_30W_ALL, No-Air-Flow) Storage Temperature -40°C ~ 85°C Relative Humidity 40 °C @ 95%, Non-Condensing
USB 1x USB 2.0 Micro-B for BSP installation only 2x USB 3.0 Type-A (USB3.2 Gen1 x1)
Storage 32GB eMMC 5.1
RS-485 1x RS-485
CAN bus 1x CAN bus with transceiver
GPIO Expansion 40 pins: 1x UART, 2x I2C, 1x CAN (W/O transceiver), 5x GPIO
User Expansion 1x M.2 Key E 2230 for Wi-Fi module (PCIe Gen4x 1) 1x M.2 Key M 2280 for NVMe (PCIe Gen4x 4) 2x M.2 Key M 2280 (PCIe Gen2 x2) or 4x mPCIe Gen2 x1
Input Power 12V/5A
Buttons Power and Recovery (Each button has a RGB tri-color LED)
RTC Battery Support RTC battery and Battery Life Monitoring by MCU
Chassis Dimension/ Weight W:196mm x L:242mm x H:60mm 7.72″ x 9.53″ x 2.36″, with mounting ears W:226mm, 8.9” Weight: 2.5Kg
Certifications CE, FCC
Processor Type RISC, up to 8 Cores
GPU Integrated GPU
Memory Capacity Up to 16GB
Serial Ports (COM) 1x RS-485
USB Ports 1x USB 2.0, 2x USB 3.0
Wireless Cellular, Wi-Fi
CAN Bus Yes
Video Ports 1x HDMI
Audio Yes
Expansion Type 2x Mini PCI Express, 4x M.2
Input Voltage 12 VDC
Mounting Options Wall-mount
Operating Temperature Wide OT: -10°C to 60°C
Market Certifications CE/FCC

Delivery Information

Orders dispatched from Assured Systems USA will be delivered using FedEx.

Payment Methods & Options

Accepted payment methods for US customers include bank transfer, VISA or Mastercard in USD.

AVerMedia: Warranty and Service Information

As an official partner for AVerMedia products, we provide a comprehensive 2 year warranty on all products supplied in the EMEA. Warranties can be extended if required, giving customers complete peace of mind about their purchase. Assured Systems have long-standing partnerships with industry leading manufacturers, delivering quality products that are backed by a professional after sales service.

Related Products

You may also like...

EMB-5872

5.25″ EBX Intel Atom D510 1.66GHz SBC with PCI, PCIe[x4], LPC, PC/104
  • CPU: 6th Gen Intel Core/Celeron/Pentium
  • Memory: Up to 32GB
  • Max Temp Range: -25°C to +70°C
  • Power Input: 8 to 35 VDC
  • Certifications: CE/FCC

ICO300

Axiomtek ICO300 Robust DIN-Mount Fanless Embedded PC, Intel Atom and 4 COM
  • CPU: Intel Atom E3815
  • Memory: Up to 8GB
  • Max Temp Range: -20°C to +70°C
  • Power Input: 12 to 24 VDC
  • Certifications: CE/FCC
DFI

EC700-BT3054

DFI EC700-BT3054 Intel E3800 Series Compact Fanless Computer with 4 x LAN
  • CPU: Intel Atom/Celeron
  • Memory: Up to 4GB
  • Max Temp Range: -20°C to +60°C
  • Power Input: 9 to 36 VDC
  • Certifications: CE/FCC

tBOX321-870-FL

Axiomtek tBOX321-870-FL Fanless Intel Core i7/i3 Railway PC, EN50121/EN50155
  • CPU: Intel Core i7/i3
  • Memory: Up to 4GB
  • Max Temp Range: -40°C to +70°C
  • Power Input: 24 VDC
  • Certifications: CE/FCC, EN 45545, EN 50155