Nexcom VTC 6221 Intel Atom E3950 Fanless In-Vehicle Computer w E-Mark Conformity

Nexcom Official Distributor
Nexcom Official Distributor
Model No:
VTC 6221
Highlights:
  • Intel Atom processor quad core E3950, up to 2.0GHz
  • Six SIM cards + three WWAN modules support
  • Built-in u-blox-M8 GPS
  • Built-in CAN Bus 2.0B
  • 1 x External storage (compatible with 9mm disk)
  • E mark conformity
  • 3 x mini-PCIe + 2 x M.2 socket expansion
  • Wide voltage input 9~48 VDC
  • Three video outputs, two VGA and one HDMI
  • 1 x Mic-in, 2 x Line-out

 

QTY:
Overview

The Nexcom VTC 6221, based on Intel Core quad core processor E3950 (up to 2.0GHz), is specifically comply with stringent E mark standard in rugged, fanless and compact mechanism. VTC 6221 provides complete communication capability between vehicle and computer with build-in CAN Bus 2.0B interface. VTC 6221 features rich WLAN and WWAN wireless connectivity. With dual SIM cards per modem support, VTC 6221 allows six SIM cards backup each other for a better connectivity quality by software. In addition, six SIM cards and three WWAN modules architecture can increase the bandwidth for a faster data transmission speed. Equipped with intelligent power management, VTC 6221 can be waked on by ignition, RTC timer or SMS message remotely. By integrating the variety of I/O ports and 3 x mini-PCIe, 2 x M.2 sockets expansibility, up to three screens via VGA and HDMI connections, VTC 6221 keeps the flexibility to meet the demand for different vehicle applications, such as infotainment, dispatching system, cellular/wireless network connectivity, and video surveillance. The design of mini-PCIe slots x 3 can solve the potential request from the market when needed.

Main Features
CPU Intel Atom® processor E3950, up to 2.0GHz, 12W, 4 core
Memory 1 x 204-pin DDR3L SO-DIMM socket support 1866MHz up to 8GB. default 4GB
Video Output Chipset Intel® HD graphics 505 1 x HDMI 1.4b up to 4096 x 2160 @30Hz 2 x VGA up to 1920 x 1200 @60Hz
Storage 1 x 2.5” SATA 3.0 external SSD (compatible with 9mm drive) 1 x CFast (externally accessible), optional mSATA
Expansion 1 x Full size mini-PCIe socket (USB 2.0) with 2 x external SIM 1 x Full size mini-PCIe socket (USB 2.0 + PCIe 2.0), BOM optional full size mini-PCIe socket (USB 2.0) with 2 x external SIM 1 x Full size mini-PCIe socket (USB 2.0 + PCIe 2.0) 1 x M.2 3042 key B (USB 2.0, USB 3.0) with 2 x external SIM 1 x M.2 3042/3050/3052 key B (USB 2.0, USB 3.0, PCIe 2.0 (BOM optional)) with 2 x external SIM
GNSS and On Board Sensor 1 x Default u-blox NEO-M8N GNSS module for GPS/Glonass/QZSS/Galileo/Beidou Optional M8U modules with dead reckoning available G Sensor (3-axis, 10-bit resolution)
LAN 2-Port LAN, 10/100/1000 Mbps I210-IT GbE, optional 3-port LAN
I/O Interface-Front 12 x LED indicators (including 2 x programmable LED) 6 x Externally accessible SIM card sockets with cover 1 x 2.5" removable SSD tray 1 x Externally accessible CFast card socket with cover 1 x Reset button 1 x Power button 1 x USB 3.0 type A (5V/0.9A) 8 x SMA antenna
I/O Interface-Rear 1 x 3-pin terminal block for 9V~48 VDC 2 x USB 2.0 type A (5V/0.5A) 2 x RJ45 LAN port, 10/100/1000 Mbps 1 x Mic-in, 2 x Line-out 2 x VGA 1 x HDMI 1.4b 1 x DB9 (COM) full RS232 3 x SMA antenna 1 x DB9 (MULTI PORT) for RS232 TX/RX, RS485, USB 2.0 1 x 18-pin terminal block
- 1 x CAN Bus 2.0B (onboard)
- 4 x DI
- 4 x DO
- Vin, GND for GPIO
Power Management & Software Support Power input 9~48 VDC Selectable boot-up & shut-down voltage for low power protection by software Setting 8-level power on/off delay time by software Support S3/S4 suspend mode 10~255 seconds WDT support, setup by software SDK (Windows/Linux) including utility and sample code
Operating System Windows 10/Linux
Dimensions 260mm (W) x 196mm (D) x 50mm (H) (10.24” x 7.71” x 1.97”)
Weight 2.5kg
Environment Operating temperatures:
- -40°C to 70°C (w/ industrial SSD) with air flow
Storage temperatures: -40°C to 80°C Relative humidity: 10% to 90% (non-condensing) Vibration (random)
- 2g@5~500 Hz (in operation, SSD)
Shock (SSD/HDD):
- Operating: MIL-STD-810G, Method 516.6, Procedure I, functional shock=20g
- Non-operating: MIL-STD-810G, Method 516.6, Procedure V, crash hazard shock test=75g
Standards/Certifications CE FCC Class A E13 mark
Compute. Control. Communicate.
Call our experts today for friendly advice on +1 864 421 6991

close

Assured Systems expertise is here for project support.

Get in touch with your requirements to see what we recommend!

phone +1 864 421 6991

close

Assured Systems expertise is here for project support.

Get in touch with your requirements to see what we recommend!

close

Assured Systems expertise is here for project support.

Get in touch with your requirements to see what we recommend!

Chat With Us!