- 8" SVGA TFT LCD monitor
- Automatic/ Manual brightness control
- Remote system power control
- On screen control buttons
- Support USB 2.0 and card reader
- Sunlight readable solution with 800cd/m2 high brightness support
- Front panel compliant with IP54
The Nexcom VMD 2000 is an 8-inch TFT LCD monitor with 4 wire resistant touch screen sensor. With the high brightness display and automatically brightness control, it is designed for in-vehicle applications. It also provides USB and card reader features. Those friendly interfaces benefit the technicians during maintenances. Its front panel is compliant to IP54 to meet with industrial applications. VMD 2000 can perfectly match with any VTC series devices via the 26-pin LVDS cable.
General | Enclosure: Plastic PC + ABS Mounting: Support VESA 75, panel and wall mounting Power Input: 12VDC Power Consumption: 15W Ingress Protection: Front panel IP54 Dimension: 207mm (W) x 173mm (H) x 36.7mm (D) (8.15" x 6.81" x 1.44") Weight (Net): 0.7Kg, 1.54Lb |
LCD Panel | 8-inch TFT LCD panel with LED backlight 800 x 600 pixels (SVGA) Brightness: 500 cd/m² (typical) Optional high brightness for sunlight-readable with 800cd/m2 After touch screen is 640cd/m2 Contrast ratio: 500:1 (typical) |
Touch Screen Sensor | 4-wire resistant touch Anti-glare coating surface Transmission rate: 82 ± 3% |
I/O Interface-Front | On screen display buttons x 5 Power on/off Brightness control (+/-) Volume control (+/-) Light sensor 2 x LED indicators 2 x Built-in speakers (1.2W) |
I/O Interface-Lateral | 1 x SD/ MMC/ MS card reader 1 x USB type A Host 1 x Line-out (automatic detection/ switch to external speaker) 1 x Mic-in |
I/O Interface-Bottom | Remote System Power On/ Off Button 1 x Mic-out 1 x Line-in 1 x LVDS Connector (integrating LVDS, USB x 1 and 12Vdc x 1) |
Optional Features | Sunlight-Readable Display with High Brightness LCD (800 cd/m2) Support Panel and wall mount kit |
Environment | Operating temperature: -20°C to 60°C Storage temperature: -30°C to 70°C Vibration (random): 2.5g@5~500 Hz Vibration Operating: MIL-STD-810F, Method 514.5, Category 20, Ground Vehicle – Highway Truck Storage: MIL-STD-810F, Method 514.5, Category 24, Integrity Test Shock Operating: MIL-STD-810F, Method 516.5, Procedure I, Trucks and semi-trailers= 20g Crash hazard: MIL-STD-810F, Method 516.5, Procedure V, Ground equipment= 75g |
Standards/ Certifications | CE approval FCC Class B |