M.2-IIRO-8

ACCES I/O M.2-IIRO-8 8 Digital Inputs and 8 Relay Outputs with COS M.2 Card

M.2-IIRO-8

  • 2260/2280 sized M.2 Card with B & M keys and latching I/O connectors
  • 8 optically-isolated non-polarized inputs
  • 8 electromechanical 1A relay outputs
  • Change-of-State (COS) detection IRQ generation
  • 9” cable (228MM), standard
  • Panel-mountable isolation module with 37-pin male D-Sub connector
  • RoHS standard

For more information please click “Add to Inquiry”. Alternatively you can contact our US sales team on +1 347 719 4508.

-
+

Details

The ACCES I/O M.2-IIRO-8 consists of a 2260/2280 sized M.2 interface card that connects to a Mobile-ITX-sized, DB-37M Isolation Module via an included 9” cable. That module is designed to be easily panel-mounted in any application environment. It uses the high speed PCI Express bus to transfer digital data to and from the card. The digital I/O is compatible with 8255 PPI chips making it easy to program. This allows for simple and trouble-free migration from other ACCES PCI and PCI Express digital I/O cards, but also provides for advanced features enabled by the onboard FPGA logic.

The M.2-IIRO cards are well suited to complex environments, mitigating otherwise challenging ground-loops, high-common-mode, and transient voltage spikes common in electrically-noisy industrial or factory locations. The broad voltage compatibility and high current outputs allows use in a wide range of applications.

The non-polarized inputs support both AC and DC, and configuration jumpers allow 4.7ms input filters to be enabled per-channel, as desired – required for AC use. The isolated inputs support voltages from 3 to 31 VDC/VAC RMS [40Hz to 10000Hz], as well as standard 12/24 AC control transformer signals.

Outputs are 5 Form C (“Single-pole, double-throw”, or SPDT) and 3 Form A (SPST) electromechanical relays capable of 1A continuous-current load.

Change of State (COS) detection and interrupt capabilities are designed to relieve software from polling routines that can consume valuable processing time. Each port can be programmed for detecting state changes on their lines, in which any changes of the enabled port’s bits (low-to-high or high-to-low) will generate an IRQ. An ISR (interrupt service routine) then determines which bit changed state and clears the interrupt.

Ordering Info

M.2-IIRO-8 8 Digital Input and 8 Relay Outputs
M.2-RO-8 8 Relay Outputs
M.2-IIRO-4 4 Digital Inputs and 4 Relay Outputs

Downloads

Assured Systems Datasheet (PDF)

A PDF edition of this page with supporting manufacturer datasheets

System Integration

Please ask about how we can configure your solution

Global Operations

We ship and support products via offices globally

Full Warranty

Industry leading warranties on all solutions as standard

Technical Support

Experienced engineers are on hand to support your project

Can't Find What You Want?

Specification

PC Interface M.2 Card
Isolated Inputs 8
Type Non-polarized, optically isolated from each other and from the computer (CMOS compatible)
Voltage 3 to 31 DC or AC RMS (40 to 10000Hz)
Isolation 500V channel-to-ground and channel-to-channel
Resistance 1.8KΩ in series with opto-coupler
Filter Response Rise-time: 4.7 msFall-time: 4.7 ms
Non-Filter Response Rise-time: 10 μsFall-time: 30 μs
Relay Outputs 8
Type 5 Form C (SPDT) and 3 Form A (SPST), Ag with Au clad,single crossbar for M.2-IIRO-8; 4 Form C for M.2-IIRO-4
AC Load 0.5A at 125 VAC (62.5 VA max)
DC Load 1A at 24 VDC (30W max)
Switching Voltage 125 VAC, 60 VDC, max
Switching Current 1A max
Contact Resistance 100 mΩ, max
Contact Life 5 million operations, min
Temperature Operating: 0°C to 70°C (order -T option for industrial temperature -40°C to 85°C)Storage: -65°C to 150°C
Humidity 5% to 95%, non-condensing
Power Required +3.3VDC @ 730ma (typical) all relays on

Shipping Information

Orders dispatched from Assured Systems USA will be delivered using FedEx.

Payment Methods & Options

Accepted payment methods for US customers include bank transfer, VISA or Mastercard in USD.

Warranty & Service Information for ACCES I/O Products (United States)

Assured Systems are proud to be an official partner of ACCES I/O providing a 2 year warranty on all products supplied within the USA, including products that have been customized. Extension options are also available for your convenience. Get the reliability you need with products and services from Assured Systems.

Related Products

You may also like...

mPCIe-ICM232-2

2-Port Isolated RS-232 PCIe Mini Card with Wide Operating Temperature

mPCIe-ICM485-2

2-Port Isolated RS-485 PCI Express Mini Card with Wide Operating Temperature

mPCIe-ICM485-4

4-Port Isolated RS-485 PCI Express Mini Card with Wide Operating Temperature

FBI90E-PBM

Profibus Master Mini-PCIe Interface Card