Nexcom VMC 1100 7" All-In-One Touch Vehicle Computer w/ Multifunctional Tracker

Nexcom Official Distributor
Nexcom Official Distributor
Model No:
VMC 1100
Highlights:
  • 7" WVGA TFT LCD Monitor with resistive touch screen
  • Built-in Intel Atom Dual Core E3825 1.33GHz
  • Compact and fanless design
  • On screen programmable F1 ~ F5 function keys
  • Support GPS/WWAN tracker function for car-safety
  • RFID for ID identification
  • Built-in GPS (Option: Dead Reckoning Support)
  • GPS/WLAN/WWAN for wireless communication
  • Dual CAN bus 2.0B and optional OBDII (SAE J1939) for car diagnostic
  • Wide Range DC input from 9 ~ 36V
  • Military standard for vibration and shock
  • SAE J1113, ISO7637-2 and SAE J1455 conformity for power design
  • CE/FCC/EMark

 

QTY:
Overview

The Nexcom VMC 1100, a new generation 7-inch vehicle mount computer with dual core Intel Atom® processor, is designed for transportation and harbor applications requiring real-time vehicle tracking and job-dispatching. For real-time communication between driver and central control room, VMC 1100 provides the capability of wireless connection from GPS, WLAN to WWAN. To get more data from accessories, it offers RS-232, RS-485, USB 2.0, GPIO, and LAN connection. Dual CANBus 2.0B ( OBDII and J1939 protocol ), analog input and PWM are able to help to receive car status more quickly and correctly. Due to the unique features above, VMC 1100 is perfect to used in harbor application from container truck, forklift, container stacker....

Main Features
General Cooling System: Fanless Enclosure: Plastic PC + ABS with aluminum die casting heatsink Mounting: Support VESA 75, stand mounting Four SMA Type antenna connectors of BT/Wi-Fi/WWAN/GPS Power Input: 9 ~ 36VDC input with Ignition Power Consumption: 26W Ingress Protection: Front panel IP54 Dimension: 213mm (W) x 145mm (H) x 50mm (D)(8.3" x 5.7" x 1.9") Weight:
N.W: 1.3Kg
G.W: 1.6Kg
LCD Panel 7-inch TFT LCD Panel with LED Backlight 800 x 480 pixels (WVGA) Brightness: 400 cd/m² (typical) Contrast ratio: 600:1 (typical)
Touch Screen Sensor 4-wire resistant touch Anti-glare coating surface Transmission rate: 78 ± 3%
CPU & Chipset Intel® Atom™ Dual Core E3825 1.33GHz
Memory One 204-pin DDR3L 1600MHz SO-DIMM slot (up to 4GB)
- Default 2GB
Expandable Storage 1 x SATAIII SATA DOM Slot (available option 16GB / 32GB / 64GB)
Expansion 1 x Half mini-PCIe socket (PCIe + USB) for WLAN option 1 x mini-PCIe socket ((USB + UART) for WWAN option) 1 x External module for OBD/RFID module option(UART + USB)
I/O Interface-Front F1 ~ F5 functions key Light Sensor Internal Mic-in 2 x Built-in 2W speakers 3 x LED indicators (Power mode, Storage and WWAN status)
I/O Interface-Lateral Right side
- 1 x Micro SD card socket
- 1 x SIM card socket
- 1 x USB 3.0 host type A connector
- 1 x Mic-in, Line-out
Left side
- 1 x Power button
- 1 x System reset button
- Volume up/down or Brightness up/dow
I/O Interface-Rear 1 x 5-pin Circular connector for Power/Ignition input 1 x RJ45 for LAN 1 x RJ45 for Full RS-232 with 0V/5V/12V power supply (0.5A) 1 x DB9 (Male) for
- RX/TX or RS-485
- 2 x CAN Bus 2.0
1 x DB15 (Female) for
- GPS dead reckoning interface (optional)
- 2 x PWM, 2 x Analog Input, 2 x GPO, 2 x GPI
 Analog Input requirement for Voltages are measured
 Channel: 2
 Voltage range: 0 ~ 38V
 Resolution: 8 bit
 Input requirement for frequency, speed
 Square wave
 Channel: 2
 Frequency signal offset voltage range: 0~15VDC, 1Hz~5KHz
 Protection: +/- 500V spike
 Frequency signal duty cycle range: 10% ~ 90%
Communication Module 1 x u-blox NEO-M8N module
(support GPS/Gloness/QZSS/Galileo/Beidou)
1 x WLAN or Bluetooth module for optional 1 x WWAN module for optional
Power Management Selectable boot-up & shut-down voltage for low power protection HW design ready for 8-level delay time on/off at user's self configuration Power on/off ignition, software detectable Support S3 and S4 suspend mode; wake on RTC and SMS
Operating System Windows 10 Windows 8 Professional, WES8 Windows 7, WES7 Linux Fedora (kernel V3.2.0)
Environment Operating temperatures: Ambient with air -20°C to 60°C Storage temperatures: -30°C to 80°C Relative humidity: 10% to 95% (non-condensing) Vibration (random): 3g @5 ~ 500Hz Vibration
Operating: MIL-STD-810G, 514.6 Procedure 1, Category 4
Storage: MIL-STD-810G, 514.6 Procedure 1, Category 24
Shock
Operating: MIL-STD-810G, Method 516.6, Procedure I, trucks and semi-trailers=20g
Crash hazard: MIL-STD-810G, Method 516.6, Procedure V, ground equipment=75g
Power Design & Protection Load dump and inductive load protection Cold cranking protection Transient voltage protection Electrostatic discharge protection
Standards/Certifications EMC
- CE, FCC class B, E-Mark
Power
- SAE J1113
- SAE J1455
- ISO 7637-2
Safety
- EN 60950-1 LVD
Compute. Control. Communicate.
Call our experts today for friendly advice on +1 864 421 6991

close

Assured Systems expertise is here for project support.

Get in touch with your requirements to see what we recommend!

phone +1 864 421 6991

close

Assured Systems expertise is here for project support.

Get in touch with your requirements to see what we recommend!

close

Assured Systems expertise is here for project support.

Get in touch with your requirements to see what we recommend!

Chat With Us!