The MLB-Z4001 by Schmidt & Co. is an Ethernet to 900 MHz RF modem designed for Ethernet communication via a ZigBee network. The modem uses an RJ45 ethernet port to receive and transfer data over a specific Mesh networking protocol, featuring dense network operation and support for sleeping routers. The modem can also be configured in a proprietary point-to-multipoint network. The MLB-Z4001 modem can be used to provide wireless communication in a variety of applications, including warehouse, factory automation and street light applications.
- Frequency Band - 902 to 928 MHz, software selectable channel mask for interference immunity
- Power Supply - Input5~32VDC
- Operating Temperature -40~+85 °CESD Protection15 KV
- Power Consumption - Normal mode: mA
- Humidity - 5~95% (non-condensing)
- Weight - 218g (without antenna)
- Casing Material - Metal
- RF Data Rate - 10 Kbps or 200 Kbps
- Indoor/Urban Range - Up to 2000ft. (610m)
- Outdoor/Line-of-sight Range - Up to 9 miles (14 km) w/ dipole antenna Up to 28 miles (45 km) w/ high-gain antenna
- Transmit Power - Up to 24 dBm (250 mW) software selectable
- Receiver Sensitivity-101 dBm @ 200 Kbps, -110 dBm @ 10 Kbps
- Networking Topologies - Mesh, Repeater, Point-to-point, Point-to-multipoint, Peer-to-peer
- Number of Channels, User Selectable Channels - 64 channels available
- Protocol - TCP/IP, UDP, HTTP, ICMP, IPv4, IGMP, DHCP, Telnet
- Encryption - 128 bit AES
- Configuration Tool - Web console/utility
- Spread Spectrum - FHSS (Software Selectable Channels)
- RF Antenna Socket - 50 Ohm SMA
- Power Connector - DC jack connector
- Network Interface - RJ45 connect for Ethernet 10/100M
- LED - 1 x Power, 1 x Tx/Rx, 1 x Ethernet 10/100M Indicator
- Reset - HW Reset
- MTBF - 2,039,188 hrs.
- Certification - EMC EN55022/24