MAQ20 8 channel voltage output module for MAQ20

The MAQ20 voltage output module and current output module offer 8 isolated voltage or current outputs. All channels are individually configurable for range and programmable output to match the most demanding applications. High level per-channel isolation gives the module unmatched ruggedness and flexibility while default outputs provide essential functionality for fail-safe systems. User defined waveform outputs allow application specific sophisticated, autonomous control. Field output connections are made through a pluggable terminal block which simplifies wiring during system setup and reconfiguration.

Input-to-bus isolation is a robust 1500Vrms and channel-to-channel isolation is 300Vrms. In addition, each channel is protected up to 40Vrms continuous overload in case of inadvertent wiring errors.

Channels in a module can be selectively enabled for output. All channels are enabled by default; however, non-used channels can be disabled to increase the refresh rate of enabled channels.

• 8 Isolated Voltage Output Channels
• All Channels Individually Configurable for Range and Programmable Output
• User-Defined Default Output and Output Waveform
• 1500Vrms Input-to-Bus Isolation
• 300Vrms Channel-to-Channel Isolation
• Each Channel Protected up to 40Vrms Continuous Overload
• Selective Enabling of Module Channels for Refresh

Communication Modules:

• MAQ20-COM2 communcation module: RS-232, Ethernet & USB
• MAQ20-COM4 communication module: RS-485, Ethernet & USB

Analog Input Modules: 

• MAQ20-VSN - 16 channel single ended voltage input module for MAQ20
• MAQ20-VDN - 8 channel differential voltage input module for MAQ20
• MAQ20-MVDN - 8 channel differential millivoltage input module for MAQ20
• MAQ20-ISN - 16 channel single ended current input module for MAQ20
• MAQ20-IDN - 8 channel differential current input module for MAQ20
• MAQ20-JTC - 8 channel type J thermocouple input module for MAQ20
• MAQ20-KTC - 8 channel type K thermocouple input module for MAQ20
• MAQ20-RSTC - 8 channel type R & S thermocouple input module for MAQ20
• MAQ20-RTD31 - 6 channel 2- or 3-wire RTD & potentiometer input module for MAQ20
• MAQ20-BRDG1 - 4 channel bridge / strain gauge module for MAQ20

Analog Output Modules:

• MAQ20-IO - 8 channel current output module for MAQ20
• MAQ20-VO - 8 channel voltage output module for MAQ20

Digital I/O Modules:

• MAQ20-DIOL - 5 channel digital I/O module w/ 90-280V AC/DC input for MAQ20
• MAQ20-DIOH - 5 channel digital I/O module w/ 3-60V AC/DC input for MAQ20

Backbones:

• MAQ20-BKPL4 - 4 I/O module & 1 communication module backbone for MAQ20
• MAQ20-BKPL8 - 8 I/O module & 1 communication module backbone for MAQ20
• MAQ20-BKPL16 - 16 I/O module & 1 communication module backbone for MAQ20
• MAQ20-BKPL24 - 24 I/O module & 1 communication module backbone for MAQ20
• MAQ20-XCA -  Backbone expansion cable for MAQ20

Power Supplies:

• PWR-PS5RA - 7.5W 24V DC power supply for MAQ20
• PWR-PS5RB - 15W 24V DC power supply for MAQ20
• PWR-PS5RC - 30W 24V DC power supply for MAQ20
• PWR-PS5RD - 50W 24V DC power supply for MAQ20
• PWR-PS5RE - 100W 24V DC power supply for MAQ20
• MAQ20-PWR3 - Load share power supply module w/ 5V DC at 3A for MAQ20

Software:

• MAQ20-940 - ReDAQ Shape
• MAQ20-951 - IPEmotion

Note: LabVIEW and any OPC client software is also supported via MAQ20