DFI M8M051 NXP i.MX 8M Quad Cortex-A53 2.5" Pico-ITX Board w/ 5 x USB & 3 x COM

DFI Official Distributor

Model No:

M8M051

Highlights:

NXP i.MX 8M Processors
Single Channel LPDDR4 up to 3200 MHz
Single Display: HDMI/LVDS
HDMI: resolution up to 4096x2160 @60Hz / LVDS: resolution up to 1920x1080 @60Hz
Multiple Expansion: 1 M.2 B Key, 1 M.2 E Key
Rich I/O: 1 Intel GbE, 3 COM, 1 USB 3.1 Gen1, 4 USB 2.0
15-Year CPU Life Cycle Support Until Q1' 35 (Based on NXP Roadmap)

Downloads:

DFI M8M051 Datasheet

Overview

The DFI M8M051 is a 2.5" Pico-ITX Motherboard powered by NXP i.MX 8M Processors. The rich I/O includes 1 x LAN, 3 x COM and 5 x USB ports. This board contains a HDMI resolution up to 4096x2160 at 60Hz and a LVDS resolution up to 1920x1080 at 60Hz.

Main Features

Processor	NXP i.MX 8M Quad Cortex-A53, 1.5GHz NXP i.MX 8M Dual Cortex-A53, 1.5GHz
Memory	2GB/4GB Memory Down Single Channel LPDDR4 up to 3200 MHz
Controller	GC7000 Lite
Feature	OpenVG 1.1, OGL ES 3.1, Vulkan, OCL 1.2 FP VPU Decode: 4Kp60 HEVC H.265, VP9, 4Kp60 H.264
Display	1 x HDMI 1 x LVDS HDMI: resolution up to 4096x2160 @60Hz LVDS: resolution up to 1920x1080 @60Hz
Single Display	HDMI or LVDS
Interface	1 x M.2 B key 3042/2242 (default: USB 2.0, opt.: USB 3.1 Gen1) USB 3.1 Gen1 channel is mutually exclusive with that of Rear I/O USB 3.1 Gen1 Type C. Nano SIM slot support (available upon request) 1 x M.2 E key 2230 (PCIe x1/USB 2.0)
Audio Codec	SGTL5000
Controller	1 x ATHEROS AR8031 Ethernet (10/100/1000Mbps)
Rear I/O: Ethernet	1 x GbE (RJ-45)
Serial	1 x RS485
USB	1 x USB 3.1 Gen1 Type C (USB 3.1 Gen1/USB 2.0) 2 x USB 2.0
Display	1 x HDMI
Internal I/O: Serial	1 x RS232 1 x RS-232/422/485 (2 x 6 pin header, 1.27mm pitch)
USB	2 x USB 2.0 (1.27mm pitch)
Display	1 x LVDS LCD Panel Connector 1 x Backlight Power
Audio	1 x Audio (Line-out/Mic-in, 2.00mm pitch)
DIO	1 x 8-bit DIO (2 x 6 header, 1.27mm pitch)
SD	1 x Micro SD Slot
CANBus	1 x CANBus 2.0
I2C	1 x I2C (1.27mm pitch)
eMMC	Support eMMC 5.1 16GB on board (default) Support up to 64GB (opt.)
Output & Interval	System Reset, Programmable via Software from 1 to 255 Seconds
Type	Single 12V +/-10% DC
Connector	2-poles Terminal Block (default) DC Jack (available upon request)
Consumption	TBD
RTC Battery	CR2032 Coin Cell
OS Support	Yocto 2.5 on eMMC (default) Android 9.0
Temperature	Operating: -5 to 65°C; -30 to 80 °C Storage: -40 to 85°C
Humidity	Operating: 5 to 90% RH Storage: 5 to 90% RH
MTBF	TBD
Dimensions	2.5"" SBC Form Factor 100mm (53.94"") x 72mm (2.83"")
Height	PCB: 1.6mm Top Side: 15mm Bottom Side: 4mm
Certifications	CE, FCC, RoHS

Ordering Info

M8M051-BCC-41QDC	Quad core Processor, 4GB Memory, 16GB eMMC, 1 GbE, 1 RS-485, 1 RS-232, 1 RS-232/ 422/485, 4 USB 2.0, 12V DC 2-pole thermal block power, Fanless Thermal
M8M051-BCC-21DLC	Dual core Processor, 2GB Memory, 16GB eMMC, 1 GbE, 1 RS-485, 1 RS-232, 1 RS-232/ 422/485, 4 USB 2.0, 12V DC Jack power, Fanless Thermal