- Channels: 4
- Input Type: mA, V, Thermistor, RTD
- Input Range: 0 to 20 mA, 4 to 20 mA, 0 to 10 V
- Watchdog Timer
Advantech's ADAM-4022T is a dual loop PID controller with an excellent accuracy of ±0.15%, ideal for measuring temperature and other processing variables in heating, cooling and other environmental tests.
The ADAM-4022T utility software allows you to select input and range configurations, and set operating parameters (SP, Sv, Pv etc) for process control. The utility software also integrates a trend chart to help you monitor and debug your control settings. DIN-mounted, the module can be powered by an unregulated supply between10~30V DC and withstands ambient temperatures between -10~70 °C (14~158 °F).
- Power Requirement: 10~30 VDC
- Analog Input
- Channels: 4 differential
- Voltage Range: 0~10 V
- Current Input: 0~20 mA, 4~20mA
- Direct Sensor Input: Thermistor 3k, 10k RTD (Pt100, 1000)
- Burn-out Detection: Yes
- Channel Independent Configuration: Yes
- Sampling Rates: 10 samples/second (total)
- Resolution: 16-bit
- CMR @ 50/60 Hz: 92 dB
- Analog Output
- Channels: 2
- Voltage Range: 0~10 V
- Current Output: 0~20 mA, 4~20mA
- General
- Watchdog Timer: System (1.6 second)
- Connector: 2 x plug-in terminal block (#14~28 AWG)
- Temperature (Operating): -10~70 °C (14~158 °F)
- Humidity: 5~95 %RH
- Temperature (Storage): -25~85 °C (-13~185 °F)
- Interface: RS-485
- Isolation Protection: 3000 VDC
- Communication Protocol: ASCII command & Modbus/RTU
- Communication Speed: Serial: From 1,200 to 115.2 k
- Data Flow Control: Yes
- Digital Input
- Channels: 2
- Input Voltage: Logic level 0: close to GND Logic level 1: open
- Digital Output
- Channels: 2 Open collector to 30V, 30 mA max. load
- Power Dissipation: 300 mW