ATC 3200

Nexcom ATC 3200 NVIDIA Jetson TX2 Fanless Rugged AIoT Edge Gateway with 2GbE PoE

ATC 3200

NVIDIA Jetson TX2 Rugged Automated Vehicle PC with e-Mark Certification, 4-CH MIPI Camera Connections, 2 PoE+ for LiDAR or GigE Vision / IP Cameras, CAN, 9-36V DC with IGN Control

  • AIoT edge gateway for ADAS and smart factory applications
  • Built-in NVIDIA Jetson TX2 SOM up to 1.3 TFOPS compute
  • The compact, rugged and fanless design
  • 4-CH MIPI SerDes CAM to reach up to 15m/25m distance
  • Operate over a wide range temperature -30~70°C
  • Two GbE with PoE+ for LiDAR or GigE Vision/IP CAM
  • Diverse data secure storage, eMMC, SD and 2.5” SSD
  • Optional for LTE/5G NR, Wi-Fi and GNSS modules
  • Rich I/O ports: USB 3.0, OTG, COM, DI/DO, CAN and 12V/5VDC, etc.
  • 9~36V DC-IN with IGN control
  • CE/FCC, Emark certified

Customisation Service

We can configure this device for you to your exact specification. So we can provide you with the best possible service, please let us know a little about your project if you need this service.

-
+

Details

AI has become an essential component of automated vehicle technologies. With built-in high cost-effective NVIDIA Jetson TX2, the rugged ATC 3200 can perform a deep learning in inference acceleration up to 1.3TFLOPS computing power suitable for in-vehicle/rolling stock applications like ANPR, ADAS, driver facial/behavior recognition even to ITS for smart city. Moreover, it also can be deployed on smart factory to expedite industrial 4.0. ATC 3200 is a compact, fanless box, which is designed with a 9~36V wide-range DC-in with IGN control, diverse I/O functions like GbE/PoE, USB 3.0, isolation CAN, serial COM, DI/DO, 12V/5V DC-OUT, specialized to an AIoT edge gateway to interface with peripheral sensors like radar, ultrasonic, LiDAR, MIPI cameras to complete an ADAS/ADS system. To be an edge gateway, ATC 3200 can support up to three media storages, 32/16GB eMMC, SD, 2.5” SSD, and WWAN/WLAN/GNSS in expansion. Besides, it can operate in a wide temperature range of -30~70°C and withstand vibration and shock for any tough environments. For certification, ATC 3200 can meet CE/FCC classA regulation, Emark certified and compliant with EN50155.

Ordering Info

ATC3200 AIoT, NV TX2 SOM w/ 8GB DDR4, 32GB eMMC, 2 x COM, 2 x PoE GbE (RJ45), 2 x USB 3.0
ATC3200-4M AIoT, NV TX2 SOM w/ 8GB DDR4, 32GB eMMC, 2 x COM, 2 x PoE GbE (RJ45), 2 x USB 3.0, 4-ch MIPI SerDes

Downloads

Assured Systems Datasheet (PDF)

A PDF edition of this page with supporting manufacturer datasheets

System Integration

Please ask about how we can configure your solution

Global Operations

We deliver and support products via offices globally

Full Warranty

Industry leading warranties on all solutions as standard

Technical Support

Experienced engineers are on hand to support your project

Can't Find What You Want?

Specification

NVDIA Jetson TX2 Integrated Dual-Core NVIDIA® Denver 2 64-bit CPU and quad-core ARM® A571.3 TFOPS compute (FP16)256-Core Pascal integrated GPU @1.2GHzOpenGL 4.5, OpenGL ES 3.2, and Vulkan 1.0DirectX® 12 compliantH.264/H.265 HW encode/decode
Memory 8GB 128-bit LPDDR4, 1600MHz
Storage 32GB eMMC 5.1 storage1 x Accessible SD1 x 2.5” SSD (15mm height) storage
Expansion 1 x Full size mPCIe socket (PCIe 2.0 + USB 2.0)Key B 3042/3052 M.2 socket (USB 3.0/2.0)
GbE 2-Port individual 10/100/1000Mbit/s, RJ45Controller: Intel® I210 IT (Jumbo frame & PTP support)
PoE IEEE 802.3af/at compliant2-Port in total 30W power budgePoE ON/OFF and power watt monitoring
MIPI CSI-2 (option) Up to 4 x individual channel (up to 4K/8MP)Thine SerDes solution (V-by-One® HS)1080p60 2Mpixel per channel @15m long reach720p30 1Mpixel per channel @25m long reachIntegrated with 3rd party Appro MIPI SerDes Camera– 1080p CAM: AP-AR0234GSC-ISP-S-SerDes(V-by-One®)– 720p CAM: AP-AR0144GSC-ISP-S-SerDes(V-by-One®)
USB 2 x USB 3.0, type A– 5V@900mA each– 5Gbit/s link speed & compliance with USB2.0 (LS/FS/HS link speed)1 x USB 2.0 type-A & 1 x OTG microUSB
Serial Port 2 x RS232/422/485 software selectable & 1x console portRS232: working voltage, +- 9V, baud rate up to 115.2kb/s2-Wire RS482: baud rate: 300~115.2Kbps, data bit: 7/8-bit, stop
DI/DO 4-Bit input– Source: 9~36VDC ([email protected]/[email protected])– External: 0~33VDC pull-high, high-level, 3.3 – 33VDC; low-level, 0 – 2 VDC4-Bit output– Source: 9~36V-in (nominal 17mA@12V, 35mA@24V)– External: 5~27VDC pull-high, sink current w/ 220mA for each bit, 500mA max (@25°C)Source or external can be selected by software (default: source type)
CAN Bus 2 x CAN 2.0A/2.0B from TX2 SOMIEC 61000-4-2 Electrostatic Discharge (ESD): ± 8KV/15KV (contact/air)2.5KV isolated
DC-Out 12VDC/2A & 5VDC/1A, mini-fit connector
Audio Line-out (unbalance stereo, left & right channel) & Mic-in
Display 1x HDMI v1.4, up to 4096×2304@24Hz
GPS and Sensor U-blox NEO-M8N GNSS module for GPS/Gloness/QZSS/Galileo/BeidouDead reckoning available (NEO-M8U/M8L) in optionBuilt-in G-sensor
I/O Ports, Front-Plate ATX power buttonReset button10 x LED indicators for PWR/IGN/WLAN/WWAN/Storage/PoE1 x OTG1 x SD socket2 x Micro SIM slots1 x DB9 (RS232/422/485, console)4 x Z-coded FAKRA for MIPI SerDes CAM (optional)
I/O Ports, Rear-Plate 3-Pin terminal block for 9~36VDC-IN2 x USB 3.0 + 1 x USB 2.0, type A1 x HDMI2 x GbE (RJ45)1 x DB9 (RS232/422/485)1 x DB15 (4 x DI + 4 x DO + 2 x CANBus)12V & 5VDC output2 x Audio-jack (left/right Line-out & Mic)5 x SMA for antenna
Dimensions & Weight 180 x 156 x 60 (W x D x H, mm)2.4kg
Environment Operating temperatures: -30°C~70°C (depends on TX2 throttoling control)Storage temperatures: -40°C~85°CRelative humidity: 10%~95% (non-condensing)
Vibration & Shock Vibraion in operating– MIL-STD-810G, 514.6C, Procedure 3, Category 4– IEC 60068-2-64: 2.0g@5~500 Hz– MIL-STD-810G, 514.6E, Procedure 1, Category 24, 7.7g approx.Shock– Operating: MIL-STD-810G, Method 516.6, Procedure I, functional shock=20g– Non-operating: MIL-STD-810G, Method 516.6, Procedure V, crash hazard shock test=75g
Regulation CE approval, FCC Class A, E13 Certified
Operating System & Software Ubuntu Linux x64 version 18.04Driver/SDK ready– NVIDIA® JetPack 4.4, MIPI SerDes Pack, custom-made SDK
Options Ublox-M8U moduleMIPI-cable-15mMIPI-cable-25mUblox-M8L module
Processor Type NVIDIA Jetson TX2, up to 2 Cores, RISC, up to 4 Cores
GPU Integrated GPU
Memory Capacity Up to 8GB
Cooling Type Fanless
Serial Ports (COM) 2x RS-232/422/485
USB Ports 1x USB 2.0, 2x USB 3.0
Ethernet Ports (LAN) 2x 1G
Power Over Ethernet (PoE) PoE Ports
Wireless Wi-Fi
CAN Bus Yes
Video Ports 1x HDMI
Digital I/O 8 DIO
Audio Yes
Storage Type 1x 2.5", 1x eMMC, 1x SDCARD
Expansion Type 1x Mini PCI Express, 1x M.2
Input Voltage 9-36 VDC
Operating Temperature Extra-Wide OT: -30°C to 70°C
Market Certifications CE/FCC, MIL-STD
OS Support Linux

Delivery Information

Orders dispatched from Assured Systems USA will be delivered using FedEx.

Payment Methods & Options

Accepted payment methods for US customers include bank transfer, VISA or Mastercard in USD.

Nexcom: Warranty and Service Information

All Nexcom products purchased from Assured Systems in the EMEA come with a 2 year warranty as standard, with additional extension options available upon request. As an official Nexcom partner, we are proud to provide customers with peace of mind and the highest quality products, including any systems which have been configured to meet individual specifications.

Related Products

You may also like...

DFI

EC700-BT3054

DFI EC700-BT3054 Intel E3800 Series Compact Fanless Computer with 4 x LAN

Matrix-710

Artilla Matrix-710 ARM Based IoT Gateway, Cortex A5 CPU, 2 CAN, 4 USB

POC-300 Series

Neousys POC-300 Series Intel Quad Core Fanless Mini PC w/ Front Facing I/O

NIFE 105W

Nexcom NIFE 105WAutomation Computer, Intel Atom x5-E3930 CPU, Fieldbus Interface