- PCI Express Mini Card (mPCIe) Type F1, Multi-Function DAQ with latching I/O connectors
- 2× 16-bit, bipolar, differential, A/D converters sampling at up to 1MHz, simultaneously (2MSPS aggregate)
- Software selectable as 16+0, 8+4, or 0+8 (single-ended + differential inputs)
- Seven channel-by-channel Programmable differential input ranges from ±0.3125V up to ±12V
- A/D starts via software, external input, or periodic timer
- A/D “scan start” mode optimizes inter-channel timing
- High Impedance, 16-channel input: 500 MΩ
- DMA+FIFO (4 kSamples) for efficient, robust data streaming
- Four 16-Bit Analog Outputs
- 5 per-channel programmable ranges: 0-5V, 0-10V, ±2.5V, ±5V, ±10V
- Outputs drive ±10mA
- “FDS” model allows hardware-timed DMA+FIFO (8 kSamples) waveform streaming on up to four DACs
- Two digital I/O with flexible secondary functions
- Onboard watchdog with status output
- RoHS Standard
Access IO mPCIe-AIO12-16E 12-Bit 100kHZ x 2 Mini-PCIe Card
ACCES I/O Official Distributor
Model No:
mPCIe-AIO12-16E
Highlights:
Downloads:
The mPCIe-AIO16-16F family is an ideal solution for adding high-speed analog I/O capabilities to any computer with an mPCIe slot.
The mPCIe-AIO16-16F is a 16-bit resolution A/D & D/A board with two simultaneous 1MHz A/D converters, providing 8 single-ended (pseudo-differential) or 4 differential analog inputs, per ADC. Each channel can be independently software configured to accept any input ranges.
Two digital I/O bits, each individually software programmable for use as an input or an output. These bits feature software-selectable alternate functions including use as ADC trigger, DAC trigger, and more.
Four analogue outputs with uni- and bipolar 5 and 10 volt ranges and a ±2.5V range round out the feature set.
The “FDS” model includes a new DMA-driven hardware-timed buffered DAC output feature, “DAC Waveform Streaming”. This feature allows one or more of the DACs to output voltage levels at a software-configurable rate as high as 1 million samples/second. Although the maximum rate is divided by the number of DACs being used, all DACs’ outputs update simultaneously on the hardware clock’s tick — all four DACs can output simultaneous data at 250 kilosamples/second, or one at 1 MHz! All the data is transferred by DMA to minimize CPU utilization, with IRQs so applications can send additional buffers of data as needed.
This tiny analogue I/O board provides the user with everything needed to start acquiring and controlling signals in a variety of applications. The mPCIe-AIO16-16F data acquisition board can be used in many current real-world applications such as embedded equipment monitoring, precision PC-based and portable environmental measurements, and mobile data acquisition. The board is designed to be used in rugged industrial environments and is double sided, mPCIe F1 sized.
Applications: Optical Networking, Instrumentation, Multichannel Data Acquisition and system monitoring, Automatic Test Equipment, Process Control and Industrial Automation, Power line monitoring.
Accessories and Connections
Available accessories include a variety of screw terminal boards for quick and easy connectivity as well as 2mm and 2.5mm mounting hardware. Alternately, custom hardware cables and/or interfaces can be produced to fit your specific application requirement.
SOFTWARE
The card is supported for use in most operating systems and includes a free Linux and Windows compatible software package. This package contains sample programs and source code in C#, Delphi, and Visual C++ for Windows. Also provided is a graphical setup program in Windows. Linux support includes installation files and basic samples for programming from user level via an open source kernel driver. Third party support includes a Windows standard DLL interface usable from the most popular application programs. Embedded OS support includes the family of Windows Operating Systems including IoT. ACCES is also now offering a VxWorks driver/library for the ultimate real-time process monitoring and control solution.
| PC Interface | |
| PCI Express Mini Card | Type F1 “Full Length” V1.2 |
| Analogue Inputs | |
| ADC Type | Successive Approximation |
| Resolution | 16-bit |
| Sampling Rate | 2Msamples/second aggregate (1MHz per ADC, simultaneous) |
| Number of Channels | 16 Single-Ended or 8 Differential (software selectable) |
| Unipolar Ranges | 0-1V, 0-2V, 0-5V, 0-10V |
| Bipolar Ranges | ±1V, ±2V, ±5V, ±10V |
| 4-20mA or 10-50mA | Factory Option |
| Accuracy | 0.094% Full-Scale (FS) Uncalibrated, 0.0015% FS Calibrated (for best accuracy, system calibration is recommended) |
| Integral Nonlinearity Error | 0.0011% FS |
| No Missing Codes | 16 bits |
| Input Impedance | 1MΩ |
| A/D Start Sources | Software, Timer, External; rising or falling edge, software selectable |
| A/D Start Enable | Externally supplied (pulled-up active-high input) |
| A/D Start Types | Single Channel, Scan of Channels (software selectable) |
| Channel Oversample | 1 to 256 consecutive samples /channel dwell |
| Overvoltage Protection | -40 to +40V |
| Crosstalk | -53dB @ 1MHz, -84db @ 500kHz |
| Analogue Outputs | |
| Number | 4 |
| Type | Single-Ended |
| Resolution | 16-bit |
| Unipolar Ranges | 0-5V, 0-10V (factory option) |
| Bipolar Ranges | ±2.5V, ±5V, ±10V (default) |
| Conversion Rate | ≥125kHz per channel |
| Setting Time | 4µs typical, 7µs max; ¼ to ¾ scale, to ±2 least-significant bits |
| Output Current | ±10mA per channel |
| Digital Inputs/Outputs | |
| Lines | 2, individually software configurable as input or output |
| Input Voltage | Logic Low: 0V to 0.8V Logic High: 2V to 5V |
| Input Current | ±20µA (max) |
| Output Voltage | Logic Low: 0V to 0.55V Logic High: 2V to 5V |
| Output Current | Logic Low: 64mA sink (max) Logic High: 32mA source (max) |
| Environmental | |
| Temperature | Operating: 0°C to 70°C (order -T option for industrial temperature -40°C to +85°C) Storage: -40°C to 105°C |
| Humidity | 5% to 95%, non-condensing |
| Power Required | +3.3VDC @ 300ma (typical) |
| Physical | |
| Weight | 6.2 Grams |
| Size | Length: 50.95mm (2.006") |
| Width: 30.00mm (1.181") | |
| I/O Connector | On-card: Molex 501190-4017 40-pin latching |
| Mating: Molex 501189-4010 | |
| Regulatory Compliance | |
| This product is designed to be in full compliance with CE requirements. |
| Model | Description |
|---|---|
| mPCIe-AIO16-16FDS |
mPCIe, 16 SE, or 8 Diff, or 8 SE and 4 Diff, 16-Bit, 1M x 2 Samples/s, AI; 2 DIO, 4 AO; Waveform Output |
| mPCIe-AIO16-16F |
mPCIe, 16 SE, or 8 Diff, or 8 SE and 4 Diff, 16-Bit, 1M x 2 Samples/s, AI; 2 DIO, 4 AO |
| mPCIe-AI16-16F |
mPCIe, 16 SE, or 8 Diff, or 8 SE and 4 Diff, 16-Bit, 1M x 2 Samples/s, AI; 2 DIO |
| mPCIe-AIO16-16A |
mPCIe, 16 SE, or 8 Diff, or 8 SE and 4 Diff, 16-Bit, 500K x 2 Samples/s, AI; 2 DIO, 4 AO |
| mPCIe-AI16-16A |
mPCIe, 16 SE, or 8 Diff, or 8 SE and 4 Diff, 16-Bit, 500K x 2 Samples/s, AI; 2 DIO |
| mPCIe-AIO12-16A |
mPCIe, 16 SE, or 8 Diff, or 8 SE and 4 Diff, 12-Bit, 500K x 2 Samples/s, AI; 2 DIO, 4 AO |
| mPCIe-AIO16-16E |
mPCIe, 16 SE, or 8 Diff, or 8 SE and 4 Diff, 16-Bit, 250K x 2 Samples/s, AI; 2 DIO, 4 AO |
| mPCIe-AI12-16A |
mPCIe, 16 SE, or 8 Diff, or 8 SE and 4 Diff, 12-Bit, 500K x 2 Samples/s, AI; 2 DIO |
| mPCIe-AIO12-16 |
mPCIe, 16 SE, or 8 Diff, or 8 SE and 4 Diff, 12-Bit, 250K x 2 Samples/s, AI; 2 DIO, 4 AO |
| mPCIe-AI16-16E |
mPCIe, 16 SE, or 8 Diff, or 8 SE and 4 Diff, 16-Bit, 250K x 2 Samples/s, AI; 2 DIO |
| mPCIe-AIO12-16E |
mPCIe, 16 SE, or 8 Diff, or 8 SE and 4 Diff, 12-Bit, 100K x 2 Samples/s, AI; 2 DIO, 4 AO |
| mPCIe-AI12-16 |
mPCIe, 16 SE, or 8 Diff, or 8 SE and 4 Diff, 12-Bit, 250K x 2 Samples/s, AI; 2 DIO |
| mPCIe-AI12-16E |
mPCIe, 16 SE, or 8 Diff, or 8 SE and 4 Diff, 12-Bit, 100K x 2 Samples/s, AI; 2 DIO |
| Model Options |
|
| -T | Extended Temperature Operation (-40° to +85°C) |
| -I | 4-20mA inputs (Single-ended) |
| -ID | 4-20mA inputs (Differential) |
| -PD | Pull downs on digital bits |
| -Sxx | -Special configurations (10-50mA inputs, input voltage dividers, conformal coating, etc.) |
| Accessories |
|
| Cable from mPCIe card to DB37M connector | |
| CAB-mPCIe-AIO | Cable, Twisted pair, Molex 40 pin to Male DB37, 9″ $29 |
| LF-BRK-P9259-37 | Mounting bracket for DB37M on CAB-mPCIe-AIO |
| Direct Connect Terminal board to DB37 | |
| ADAP37F-MINI | Direct plug-on terminal board mates with DB37M on CAB-mPCIe-AIO $40 |
| Cable Connectivity to DB37 | |
| CAB37-18 | Cable, Ribbon, DB37F-F, 18″ $25. (Other lengths available) |
| STB-37 | Screw terminal board, DB37M, DIN-rail mountable $39 |
| Mounting Hardware | |
| DIN-SNAP-6 | 6” SNAPTRACK, DIN-Rail mounting clips to mount an STB-37 $15 |
| mPCIe-HDW-KIT2 | 2mm mounting hardware kit $1 |
| mPCIe-HDW-KIT2.5 | 2.5mm mounting hardware kit $1 |
Related Products:
Compute. Control. Communicate.
Call our experts today for friendly advice on +44 (0) 1785 879 050