Choosing The Best Pixel Pitch For Your LED Display

Assured Systems supply a wide range of LED displays. Understand what pixel pitch you need for your LED display.

Discuss your project requirements

Summarising Pixel Pitch 

• Pixel pitch refers to the density of pixels
• A smaller pixel pitch indicates higher pixel density and higher resolution
• Pixel pitch is important because it influences viewing distance
• The smaller the pixel pitch, the closer the viewing distance
• The optimal viewing distance of your screen informs the pixel pitch value

Pixel pitch describes the density of the pixels (LED clusters) on an LED display and correlates with resolution. Sometimes referred to as pitch or dot pitch, the pixel pitch is the distance in millimetres from the centre of a pixel to the centre of the adjacent pixel. Since pixel pitch indicates the amount of space between two pixels, a smaller pixel pitch means there is less empty space between pixels. This equates to higher pixel density and improved screen resolution.

Why is pixel pitch important?

Pixel pitch is important because it influences the optimal viewing distance for your display. An image achieves smoother borders and finer detail with lower pixel pitch values. This allows the viewer to stand closer to the screen and enjoy a clear image without the distraction of discerning individual pixels. When determining viewing distance and pixel pitch, the rule of thumb is that a smaller pixel pitch allows for a closer viewing distance. Conversely, a higher pixel pitch elongates the minimum viewing distance. So, a 1.2mm screen will have significantly higher resolution and a closer optimal viewing distance than a 16mm .While higher pixel density delivers improved visual quality, it is not the ideal option for every situation. Additional pixel density is intended for a closer viewing distance. At a greater viewing distance, higher pixel density loses its visual advantages and simply increases the cost of the display.

What is the right pixel pitch for my needs?

Smaller pixel pitch universally provides greater resolution, but is more expensive. Materials and production costs are higher for smaller pixel pitch since more LED clusters are required to create a higher pixel density.Consumers can get the best value for their LED screen by determining the optimal viewing distance of their screen. The optimal viewing distance is the point where image fidelity is retained, but if the observer moved much closer, the image quality would decrease or the screen would appear pixelated.

For example, a display with interactive touch solutions will need a low pixel pitch to produce crisp images for the nearby audience. On the other hand, an LED screen displayed above viewers, like one hung in an arena, could get away with a higher pixel pitch. The short answer is that a smaller pixel pitch will always give you better quality image, but the investment will not be fully appreciated if the screen is not seen from a sufficiently close enough distance.

There are three methodologies used in the industry to determine acceptable viewing distance:

10x Rule: This is a shorthand method for calculating an approximate estimate of the Visual Acuity Distance. The calculation is: Pixel Pitch x 10 = Approximate Viewing Distance in Feet

Visual Acuity or Retina Distance: This is a formulated calculation of the distance a person with 20/20 vision must move away from an LED screen to see a coherent image that is not pixelated. The visual acuity in feet is formulated by multiplying the pixel pitch x 3438.

The Average Comfortable Viewing Distance: This is an estimate of what would be a comfortable viewing distance for most people. This is a subjective estimate and will take into account variables like a person’s eye sight, resolution of content and type of content.

While these methodologies are useful guides, there is no correct answer in determining viewing distance. A screen’s viewing distance is ultimately whatever the owner of the screen finds comfortable.