CEM510

Axiomtek CEM510 COM Type 6 Module with Intel Xeon E3/7th Gen i7/i5/i3 Processors

CEM510

  • Intel® Xeon® E3 and 7th gen Intel® Core™ i7/i5/i3 processors (Kaby Lake-H)
  • Intel® CM238/QM175/HM175 chipset
  • 2 x DDR4-2133 SO-DIMM slots, up to 32GB ECC or non-ECC
  • 1 x PCIe x16 and 8 PCIe x1 Gen. 3
  • 4 x SATA-600 with RAID 0/1/5/10
  • 4 x USB 3.0 and 8 x USB 2.0
  • Intel® AMT 11.0 and TPM 1.2 function supported
  • AXView 2.0 intelligent remote management software for industrial IoT applications

For further information, please click “Add to Enquiry” or call us on +44 (0) 1785 879050 (UK).

Customisation Service

We can configure this device for you to your exact specification. So we can provide you with the best possible service, please let us know a little about your project if you need this service.

-
+

Details

The Axiomtek CEM510 is based on the Intel® Xeon® E3 and 7th generation Intel® Core™ i7/i5/i3 processors with Intel® CM238/QM175/HM175 chipset. The 125 x 95 mm system-on-module was designed for graphics-intensive applications over the Industrial IoT, including industrial control, medical imaging, digital signage, and gaming machines. The embedded module is equipped with dual 260-pin DDR4-2133 SO-DIMM slots with up to 32GB system memory. Its wide operating temperature range of -40°C to +85°C strengthens the adaptability of various harsh conditions. For evaluation and development purposes, Axiomtek also has the CEB94011, a carrier board designed to operate with the CEM510 for additional I/O and expansions interfaces. Integrated with Intel® Gen 9 graphics, and with the support of DX12.0, OCL 2.0 and OGL 4.3, the module presents excellent graphics performance with resolution up to 4K (3840 x 2160 @ 30 Hz). Three independent displays are supported through LVDS and three DDI ports supporting HDMI, DisplayPort, and DVI (one DDI supporting optional VGA).

Ordering Info

CEM510-E3-1505M v6+CM238 (P/N-E38D510100)

COM Express Type 6 basic module with Intel® Xeon® E3-1505MV6, CM238, DDI/LVDS, GbE LAN, USB 3.0 and TPM

CEM510-I3-7100E+CM238 (P/N-E38D510101)

COM Express Type 6 basic module with Intel® Core™ i3-7100E, CM238, DDI/LVDS, GbE LAN, USB 3.0 and TPM

CEM510-I7-7820EQ+QM175 (P/N-E38D510102)

COM Express Type 6 basic module with Intel® Core™ i7-7820EQ, QM175, DDI/LVDS, GbE LAN, USB 3.0 and TPM

CEM510-i5-7440EQ+QM175 (P/N-E38D510103)

COM Express Type 6 basic module with Intel® Core™ i5-7440EQ, QM175, DDI/LVDS, GbE LAN, USB 3.0 and TPM

CEM510-I3-7100E+QM175 (P/N-E38D510104)

COM Express Type 6 basic module with Intel® Core™ i3-7100E, QM175, DDI/LVDS, GbE LAN, USB 3.0 and TPM

CEM510-I3-7102E+HM175 (P/N-E38D510105)

COM Express Type 6 basic module with Intel® Core™ i3-7102E, HM175, DDI/LVDS, GbE LAN, USB 3.0 and TPM

CEB94011 (P/N-E394011100)

CEB94011 COM Express Type 6 evaluation board

TS008-CEM500 (P/N-E39J008100)

CEM500 heat sink with fan

TS006-CEM500 (P/N-E39J006100)

CEM500 heat spreader

Downloads

Assured Systems Datasheet (PDF)

A PDF edition of this page with supporting manufacturer datasheets

System Integration

Please ask about how we can configure your solution

Global Operations

We deliver and support products via offices globally

Full Warranty

Industry leading warranties on all solutions as standard

Technical Support

Experienced engineers are on hand to support your project

Can't Find What You Want?

Specification

CPU
  • Intel® Xeon® E3 and 7th gen Intel® Core™ i7/i5/i3 processors (Kaby Lake-H)
Chipset
  • Intel® CM238/QM175/HM175
System Memory
  • 2 x DDR4-2133 SO-DIMM, up to 32GB
BIOS
  • AMI
COM
  • 2 x TX/RX serial interface
USB
  • 4 x USB 3.0
  • 8 x USB 2.0
Ethernet
  • 1 x 10/100/1000 Mbps (Intel® i219LM)
Display
  • 1 x LVDS ;18/24-bit single/dual channel (default), optional with eDP
  • 1 x VGA up to 1920 x 1200 @60Hz (default)
  • 2 x DDI (DP/HDMI/DVI)
GPIO
  • 4-IN & 4-OUT
Audio
  • HD link interface to baseboard for Codec
Storage
  • 4 x SATA-600 with RAID 0/1/5/10
Expansion
  • 1 x PCIe x16 Gen 3.0
  • 8 x PCIe x1 Gen 3.0
Others
  • 1 x LPC interface
  • 1 x SPI interface
  • 1 x I2C interface
  • TPM 1.2
Battery
  • N/A
Power Input
  • ATX: +12V, +5VSB; AT: +12V
Watchdog Timer
  • 65536 levels, 0 ~ 65535 sec.
Hardware Monitoring
  • Yes
Operating Temperature
  • -40ºC ~ +85ºC (-40ºF ~ +185ºF)
Relative Humidity
  • 10% ~ 95% relative humidity, non-condensing
Dimensions
  • 125 x 95 mm
Board Thickness
  • 2.0 mm
Certifications
  • CE

Delivery Information

Orders placed by EMEA customers will be delivered by DHL.

Payment Methods & Options

Accepted payment options for EMEA customers include VISA, Mastercard or bank transfer in GBP.

Axiomtek: Warranty and Service Information

As an official partner for Axiomtek products, we provide a comprehensive 2 year warranty on all products supplied in the EMEA. Warranties can be extended if required, giving customers complete peace of mind about their purchase. Assured Systems have long-standing partnerships with industry leading manufacturers, delivering quality products that are backed by a professional after sales service.

Related Products

You may also like...

CEM310

Axiomtek CEM310 COM Type 10 Mini Module with Intel Atom x5 and x7 Processor

CEM100

Axiomtek CEM100 COM Type 2 Basic Module with AMD G-Series APU and AMD A55E

CEM312

Axiomtek CEM312 COM Type 6 Compact Module with Intel Atom x5 and x7 Processor

CEM842

Axiomtek CEM842 COM Type 6 Module with Intel Celeron Processor J1900/N2807