LPCI-IIRO-8

16-channel Low Profile Isolated Digital Input/Output Card

LPCI-IIRO-8

The LPCI-IIRO-8 is a half-size Low-Profile PCI bus compatible card that provides isolated digital input and output interface for PCI-Bus computers. The card has eight optically-isolated digital inputs for AC or DC control signals and eight electromechanical relay outputs. LPCI-IIRO-8 occupies four consecutive 8-bit registers in I/O space. The LPCI-IIRO-8 provides eight optically-isolated inputs. These inputs can accept either AC or DC signals and are not polarity sensitive. Input signals are rectified by photocoupler diodes while unused power gets dissipated thru a 1.8k-ohm resistor in series. The inputs may be driven by either DC sources of 3 to 31 volts (rms) or AC sources at frequencies of 40 Hz to 10 KHz. Standard 12/24 AC control transformer outputs can be accepted as well. Each input circuit contains a switchable filter that has a 4.7 millisecond time constant. (Without filtering, the response is less then 40 microseconds) The filter must be selected for AC inputs in order to eliminate the on/off response to AC. The filter is also valuable for use with slow DC input signals in a noisy environment. The filter may be switched out for DC inputs in order to obtain faster response. Filters are individually selected by jumpers. The filters are switched into the circuit when the jumpers are installed in position FLT0 to FLT15. The board's outputs are comprised of eight FORM C SPDT electro mechanical relays. These relays are all de-energised at power-on.

  • Brand: Acces IO
  • 8 optically-isolated, non-polarized CMOS compatible digital inputs accept ±31volts DC or AC rms
  • 8 form C electro-mechanical relays switch up to 1 A each
  • Universal PCI, PCI-X, 3.3V and 5V compatible (Call for PCI-Express availability)

For further information, please click “Add to Enquiry” or call us on +44 (0) 1785 879050 (UK).

-
+

Details

The LPCI-IIRO-8 is a half-size Low-Profile PCI bus compatible card that provides isolated digital input and output interface for PCI-Bus computers. The card has eight optically-isolated digital inputs for AC or DC control signals and eight electromechanical relay outputs. LPCI-IIRO-8 occupies four consecutive 8-bit registers in I/O space. The LPCI-IIRO-8 provides eight optically-isolated inputs. These inputs can accept either AC or DC signals and are not polarity sensitive. Input signals are rectified by photocoupler diodes while unused power gets dissipated thru a 1.8k-ohm resistor in series. The inputs may be driven by either DC sources of 3 to 31 volts (rms) or AC sources at frequencies of 40 Hz to 10 KHz. Standard 12/24 AC control transformer outputs can be accepted as well. Each input circuit contains a switchable filter that has a 4.7 millisecond time constant. (Without filtering, the response is less then 40 microseconds) The filter must be selected for AC inputs in order to eliminate the on/off response to AC. The filter is also valuable for use with slow DC input signals in a noisy environment. The filter may be switched out for DC inputs in order to obtain faster response. Filters are individually selected by jumpers. The filters are switched into the circuit when the jumpers are installed in position FLT0 to FLT15. The board's outputs are comprised of eight FORM C SPDT electro mechanical relays. These relays are all de-energised at power-on.

Ordering Info

LPCI-IIRO-8

Downloads

Assured Systems Datasheet (PDF)

A PDF edition of this page with supporting manufacturer datasheets

System Integration

Please ask about how we can configure your solution

Global Operations

We deliver and support products via offices globally

Full Warranty

Industry leading warranties on all solutions as standard

Technical Support

Experienced engineers are on hand to support your project

Can't Find What You Want?

Specification

  • 8 optically-isolated, non-polarized CMOS compatible digital inputs accept ±31volts DC or AC rms
  • 8 form C electro-mechanical relays switch up to 1 A each
  • Universal PCI, PCI-X, 3.3V and 5V compatible (Call for PCI-Express availability)

Delivery Information

Orders placed by EMEA customers will be delivered by DHL.

Payment Methods & Options

Accepted payment options for EMEA customers include VISA, Mastercard or bank transfer in GBP.

ACCES I/O: Warranty and Service Information

All ACCES I/O products distributed in the EMEA come with a 2 year warranty as standard, with additional extension options available upon request. As an official ACCES I/O partner, we are proud to provide customers with peace of mind and the highest quality products, including any systems which have been configured to meet individual specifications.

Related Products

You may also like...

RDI-54

Remote Acces 54-Bit Digital Input Pod

104-DIO-24S

Change-Of-State Detecting Digital I/O Cards

USB-AIO Series

16 Channel USB Multifunction Analog Input/Output Device (12/16-bit)

P104-DIO-96 Series

PC/104-Plus 48 or 96-Channel Digital I/O with Change-of-State