PCI-DIO-24H/24D

PCI Bus 24-bit Digital Input/Output Cards

PCI-DIO-24H/24D

These cards are 24-bit parallel, digital input/output cards designed for use in PCI-Bus computers. The difference between the models is that I/O connections to PCI-DIO24D are via a standard 37-pin D-sub connector while I/O connections to PCI-DIO24H are via a 50-pin connector. The cards may be installed in any 5V PCI-bus slot in IBM and compatible personal computers. These cards contain a type 8255-5 Programmable Peripheral Interface (PPI) chip. They can be programmed to accept inputs or to provide outputs on three 8-bit ports: designated Ports A, B, and C. Port C can be further divided into two 4-bit nibbles. Each I/O line is buffered by a type 74ABT245B tristate buffer transceiver capable of sourcing 32 mA or sinking 64mA. The buffers are configured under program control for input or output use according to direction control signals from the control register inside the PPI. Pull-ups (to +5 VDC) on the card assure that there are no erroneous outputs at power-up until the card is initialised by system software. Further, jumpers on the card provide a choice to either permanently enable the buffers or to tri-state them under program control. Input/Output wiring connections for the PCI-DIO24D are via a 37-pin D-sub connector on the card mounting bracket. Either a 37-pin D-sub solder cup mating connector or an insulation-displacement ribbon cable can be used for I/O connections. Fused +5 VDC power is available at the I/O connector. A re-settable on-board fuse is rated at 0.5A and can be reset by cycling computer power. Input/Output wiring connections for PCI-DIO24H are via a 50-pin connector on the card mounting bracket. Insulation displacement ribbon cables can be used for I/O connections to termination panels such as ACCES' model STA-50 Screw Terminal card. The pin connections are also compatible with ACCES A24A , Grayhill, OPTO22, Western Reserve Controls, Potter& Brumfield, etc opto-isolated module mounting racks. If needed for external circuits, fused +5VDC power is available at the I/O connector. The resettable 0.5A fuse can be reset by cycling computer power.

  • Brand: Acces IO
  • Four and eight bit ports independently selectable for I/O
  • Automatically detected under Windows
  • No base address or IRQ switches to set
  • Optional 1 MHZ counters

For further information, please click “Add to Enquiry” or call us on +44 (0) 1785 879050 (UK).

-
+

Details

These cards are 24-bit parallel, digital input/output cards designed for use in PCI-Bus computers. The difference between the models is that I/O connections to PCI-DIO24D are via a standard 37-pin D-sub connector while I/O connections to PCI-DIO24H are via a 50-pin connector. The cards may be installed in any 5V PCI-bus slot in IBM and compatible personal computers. These cards contain a type 8255-5 Programmable Peripheral Interface (PPI) chip. They can be programmed to accept inputs or to provide outputs on three 8-bit ports: designated Ports A, B, and C. Port C can be further divided into two 4-bit nibbles. Each I/O line is buffered by a type 74ABT245B tristate buffer transceiver capable of sourcing 32 mA or sinking 64mA. The buffers are configured under program control for input or output use according to direction control signals from the control register inside the PPI. Pull-ups (to +5 VDC) on the card assure that there are no erroneous outputs at power-up until the card is initialised by system software. Further, jumpers on the card provide a choice to either permanently enable the buffers or to tri-state them under program control. Input/Output wiring connections for the PCI-DIO24D are via a 37-pin D-sub connector on the card mounting bracket. Either a 37-pin D-sub solder cup mating connector or an insulation-displacement ribbon cable can be used for I/O connections. Fused +5 VDC power is available at the I/O connector. A re-settable on-board fuse is rated at 0.5A and can be reset by cycling computer power. Input/Output wiring connections for PCI-DIO24H are via a 50-pin connector on the card mounting bracket. Insulation displacement ribbon cables can be used for I/O connections to termination panels such as ACCES' model STA-50 Screw Terminal card. The pin connections are also compatible with ACCES A24A , Grayhill, OPTO22, Western Reserve Controls, Potter& Brumfield, etc opto-isolated module mounting racks. If needed for external circuits, fused +5VDC power is available at the I/O connector. The resettable 0.5A fuse can be reset by cycling computer power.

Ordering Info

  • PCI-DIO-24D
  • PCI-DIO-24H

Downloads

Assured Systems Datasheet (PDF)

A PDF edition of this page with supporting manufacturer datasheets

System Integration

Please ask about how we can configure your solution

Global Operations

We deliver and support products via offices globally

Full Warranty

Industry leading warranties on all solutions as standard

Technical Support

Experienced engineers are on hand to support your project

Can't Find What You Want?

Specification

  • Universal PCI, PCI-X, 3.3V and 5V compatible (PCI-Express available)
  • 24 bits of digital I/O
  • Four and eight bit ports independently selectable for I/O
  • All 24 I/O lines buffered by transceivers on the card
  • I/O buffers can be enabled/disabled under program control
  • Pull-ups on I/O lines
  • Resettable fused +5 VDC output available
  • ‘H’version compatible with industry standard I/O racks like Grayhill, Opto 22, Western Reserve Controls, Potter and Brumfield, etc.
  • Optional 1 MHZ counters
  • Automatically detected under Windows
  • No base address or IRQ switches to set

Delivery Information

Orders placed by EMEA customers will be delivered by DHL.

Payment Methods & Options

Accepted payment options for EMEA customers include VISA, Mastercard or bank transfer in GBP.

ACCES I/O: Warranty and Service Information

All ACCES I/O products distributed in the EMEA come with a 2 year warranty as standard, with additional extension options available upon request. As an official ACCES I/O partner, we are proud to provide customers with peace of mind and the highest quality products, including any systems which have been configured to meet individual specifications.

Related Products

You may also like...

104-IDI-48 Family

48-Channel Optically Isolated Digital Input Boards

USB-AIO Series

16 Channel USB Multifunction Analog Input/Output Device (12/16-bit)